|
[Sponsors] |
October 28, 2010, 20:17 |
Particle dispersion model with LES?
|
#1 |
New Member
Kushagra Mittal
Join Date: Mar 2009
Posts: 15
Rep Power: 17 |
Hi,
Is there any dispersion model available for particle tracking with LES in Openfoam ? I found three models in openfoam: 1) StochasticDispersionRAS 2) none 3) GradientDispersionRAS First and last option can not be used with LES and gives error as they seem to be based on RANS turbulence modeling? Can some one please comment and guide me? Many thanks, Kushagra |
|
October 29, 2010, 12:13 |
|
#2 |
Senior Member
matej forman
Join Date: Mar 2009
Location: Brno, Czech Republic
Posts: 182
Rep Power: 17 |
Hi,
as you write the only dispersion model available for LES is none, which probably does not do what you want. The question is: Do you need a dispersion model for your LES simulation? What is the Stokes number of your particles, what is your particle time scale compared to the timescale of unresolved turbulence? If you really need it, it should not be difficult to write your own following the RAS model as a template and some LES dispersion model from the literature. btw. there is a dummy LES dispersion implementation in spray class of dieselSpray. good luck matej |
|
October 29, 2010, 15:50 |
|
#3 |
New Member
Kushagra Mittal
Join Date: Mar 2009
Posts: 15
Rep Power: 17 |
Dear Matej,
Thank you very much for your help. I will look in to details you pointed out and get back to you. Thanks once again, Regards, Kushagra |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Macroscopic particle model | sbiswas12000@yahoo.com | Main CFD Forum | 1 | October 26, 2017 03:57 |
Turbulent Dispersion for Coal Combustion | gravis | CFX | 2 | March 23, 2010 23:56 |
A model is used to model particle interaction with the geometry | dungsidietquy | FLUENT | 0 | November 4, 2009 16:05 |
How to create a pollution dispersion model? | Diwanshu | Siemens | 4 | September 3, 2008 11:49 |
LES particle dispersion | Rasmus Gjesing (Gjesing) | OpenFOAM Running, Solving & CFD | 1 | January 4, 2005 11:00 |