|
[Sponsors] |
How to represent the pressure evaluated by multidimensional averaging? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 4, 2010, 02:44 |
How to represent the pressure evaluated by multidimensional averaging?
|
#1 |
Member
任芸
Join Date: Jun 2009
Posts: 75
Rep Power: 16 |
Hello,
I am studying pressure correction equation in SIMPLE algorithm by OpenFOAM-1.5-dev, and now I encounter a tough problem. So, I need your help. The SIMPLE algorithm I studied is in the solver of MRFSimpleFoam and I want to add a new pressure prediction between the mass conserving pressure correction equation and the application of under-relaxation. Actually, the new pressure is the average pressure evaluated by multidimensional averaging. Thus ……………………………………………………………….….① Where, is a previous iteration of pressure field. is computed via pressure equation in SIMPLE of MRFSimpleFOAM. is evaluated by multidimensional averaging. is the distance between the owner point and neighbor cell centers. is the neighbor nodes Then, the new pressure field distribution () is used for correcting pressure and velocity by applying the under-relaxation, and this step is the same as it in SIMPLE . My problem is how to calculate and represents them in OpenFOAM codes. Thanks! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Calculation of the Governing Equations | Mihail | CFX | 7 | September 7, 2014 06:27 |
Maintaining Static Pressure at Fluid Flow Inlet | cdevalve | FLUENT | 3 | January 14, 2012 00:11 |
Setup/monitor points of pressure and force coefficients | siw | CFX | 3 | October 22, 2010 06:07 |
Pressure Inlet yields wrong velocities | Ben | FLUENT | 0 | November 21, 2004 01:47 |
Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 15:00 |