CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Running, Solving & CFD


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 3, 2012, 17:34
Default sloshingTank2D
Senior Member
musaddeque hossein
Join Date: Mar 2009
Posts: 309
Rep Power: 11
musahossein is on a distinguished road
Dear all:

The problem I am tying to solve is a simple one, but I cannot seem to figure out how to get the result that I need. The problem is: I have a rectangular tank half full of a fluid. At t=0, I push the tank some distance "x". What is the force on the walls? Obviously, due to inertia, the fluid will "pile up" against the wall in the direction opposite to the direction of the displacement. If I do a sample, then I will get pressure readings at each wall at specified time intervals. So my question is, at the end of the run for one displacement, what is the total pressure force on the wall? Is it the sum of the pressure forces on the wall at each time interval? or is it something else?

Any suggestions would be greatly appreciated. Thanks!!
musahossein is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 05:11.