CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

Dam Break Tutorial - 2.3.11 Running in parallel

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By vitors

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 12, 2012, 10:21
Question Dam Break Tutorial - 2.3.11 Running in parallel
  #1
Member
 
Vitor Vasconcelos
Join Date: Jan 2012
Posts: 33
Rep Power: 14
vitors is on a distinguished road
Hello all,

I tried to extend the damBreak parallel tutorial to run it in two quad-core machines.

I have the same directories in both machines, ssh working without password.

I've set the decomposeParDict to 7 slaves.

The decomposePar command seems to work fine.

When I run the simulation (mpirun -np 8 --hostfile machines interFoam -parallel)
I got the message: "--> FOAM FATAL ERROR : Cannot find file "points" in directory "constant/polyMesh"

I've read some posts about it, but all of them were about the reconstruction. I've got it when trying to run the simulation...

Any suggestions?

Thanks in advance.
vitors is offline   Reply With Quote

Old   January 17, 2012, 07:38
Default
  #2
New Member
 
Join Date: Jan 2012
Posts: 1
Rep Power: 0
|matthias| is on a distinguished road
Hello vitors,

have you looked for the points in the constant/polyMesh directory? In case they don t exist, you should run blockMesh first, then decomposePar and finally mpirun...

Greetings, matthias
|matthias| is offline   Reply With Quote

Old   January 17, 2012, 07:46
Thumbs up
  #3
Member
 
Vitor Vasconcelos
Join Date: Jan 2012
Posts: 33
Rep Power: 14
vitors is on a distinguished road
Quote:
Originally Posted by |matthias| View Post
Hello vitors,

have you looked for the points in the constant/polyMesh directory? In case they don t exist, you should run blockMesh first, then decomposePar and finally mpirun...

Greetings, matthias
Hi Matthias. I checked it and the files are there. But I could solve and (as usual when we are begginers) the problem was in decompositionParDict file. The roots were incorrect. I was using the case directory and when changed to the upper directory the simulation ran.

Thanks for your reply,

Vitor
lyna likes this.
vitors is offline   Reply With Quote

Old   August 2, 2019, 20:22
Default Error Running the Dambreak Tutorial
  #4
Senior Member
 
Join Date: Jul 2019
Posts: 148
Rep Power: 6
Bodo1993 is on a distinguished road
Hello All,



I am new to openFoam. I am facing some issues on running in parallel.



The first attempt was in trying to run the dambreak tutorial. got the below error:

--------------------------------------------------------------------------------------------------------------
Primary job terminated normally, but 1 process returned a non-zero exit code. Per user-direction, the job has been aborted.
--------------------------------------------------------------------------------------------------------------
The way I ran the solver is by typing in the terminal:

mpirun -np 4 interFoam -parallel




The second attempt is when I tried to ran lockExchange tutorial in twoLiquidMixingFoam solver. I got the below error:

--------------------------------------------------------------------------------------------------------------
There are not enough slots available in the system to satisfy the 8 slots
that were requested by the application:
twoLiquidMixingFoam

Either request fewer slots for your application, or make more slots available
for use.

--------------------------------------------------------------------------------------------------------------

The way I run the tutorials is by typing in the terminal:

mpirun -np 8 twoLiquidMixingFoam -parallel


I am running the tutorials on a university machine that has 12 cores.



I would much appreciate your assistance to resolve the above issues.



Thanks in advance.
Bodo1993 is offline   Reply With Quote

Reply

Tags
"find file points...", dambreak, foam fatal error, parallel

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
User fortran error when running CFX-10 in parallel CFDworker CFX 3 September 22, 2015 09:59
RSH problem for parallel running in CFX Nicola CFX 5 June 18, 2012 19:31
problem with running in parallel dhruv OpenFOAM 3 November 25, 2011 06:06
[mesh manipulation] refineMesh -parallel crashes (in cavity tutorial) andras OpenFOAM Meshing & Mesh Conversion 0 August 8, 2010 15:52
3D dam break flow problem woochang CFX 1 February 18, 2010 17:47


All times are GMT -4. The time now is 07:11.