|
[Sponsors] |
March 19, 2012, 13:09 |
Ggi Question
|
#1 |
Member
Jason Eason
Join Date: Jan 2010
Location: Portage, Michigan
Posts: 45
Rep Power: 16 |
I want to run a case with pimpleDyMFoam on OpenFOAM-1.6-ext, I have a 3D rotor. I've studied icoDyMFoam, for more background on ggi. My rotor is inside of my ggi, my checkMesh indicates there are problems with my ggi. BlockMesh is how I created my rotor and ggi. I created my ggi with 4 blocks, and its 1D.
1. Can the ggi be the outermost mesh? Or does it have to be housed within a mesh? 2. Does the ggi have to be implemented with the inside and outside using a different number of blocks as with the icoDyMFoam tutorial? If someone could post an example for just a ggi mesh it would help immensely. Thank You. For anyone who has the same questions, I think I've found all the answers to my own questions. 1. I 'm not 100% about does it have to be the outermost, for my case I created my ggi from an outer mesh. To set the outsideSlider faces. 2. I've created my ggi using the same number of blocks for the insideSlider and the outsideSlider. The 2 sliders can't contain the same vertices, just make 2 vertices that occupy the same point. Assign 1 to the insideSlider and the other to the outsideSlider. The points that occupy the same space should never connect to one another. Essentially making the slider 2D, while working in 3D. I hope this helps someone .
__________________
Debian Squeeze - OpenFOAM-2.1.x, Paraview-3.12.0 Last edited by JulytoNovember; March 31, 2012 at 11:04. Reason: updated info |
|
Tags |
ggi |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ggi and "uncovered faces found" | aqua | OpenFOAM Running, Solving & CFD | 1 | October 29, 2019 01:41 |
GGI together with topological changes... | kalle | OpenFOAM Running, Solving & CFD | 6 | May 7, 2012 14:50 |
GGI in OpenFOAM-1.5-dev | philippose | OpenFOAM Running, Solving & CFD | 14 | November 13, 2011 15:55 |
GGI in Parallel error | renyun0511 | OpenFOAM Running, Solving & CFD | 1 | November 9, 2011 22:56 |
questions about GGI interface overlap | adam2008 | CFX | 3 | March 20, 2011 22:08 |