OpenFOAM Running, Solving & CFD

User Name Remember Me Password

Read this first: How to ask a question on the forums

Page 140 of 492 « First < 40 90 130 138 139 140 141 142 150 190 240 > Last »

Threads in Forum : OpenFOAM Running, Solving & CFD

Forum Tools

Search this Forum

		Rating Thread / Thread Starter	Last Post	Replies	Views
		CFD accuracy in turbulent low speed flow compared Sina.Li	December 16, 2019 21:00 by Sina.Li	0	607
		Divergence problem with interMixingFoam FraukeCFD	December 16, 2019 10:20 by FraukeCFD	0	915
		problems when using interFoam Peida	December 15, 2019 22:36 by Peida	1	545
		RhoCentralFoam sudden increase of u and drop of T Friendly	December 15, 2019 07:21 by Friendly	2	937
		Problem in Mapfield from coarser grid to finer grid chandra shekhar pant	December 15, 2019 05:38 by chandra shekhar pant	3	795
		Residual problem antoniomollo	December 15, 2019 03:53 by antoniomollo	0	600
		What combustion model in openFOAM can be used for turbulent premixed flames? openfoamer93	December 13, 2019 18:16 by openfoamer93	5	1,746
		Cannot find patchField entry for cyclic1 uzy	December 13, 2019 15:18 by uzy	5	1,863
		Converging Diverging Nozzle with dbnsTurbFoam Saleh Abuhanieh	December 13, 2019 11:26 by hand90	4	1,517
		GGI or cyclicGgi shach934	December 13, 2019 09:59 by shach934	0	853
		Water climbs up a hill Kahnbein.Kai	December 13, 2019 05:10 by Kahnbein.Kai	7	947
		Ending OpenFOAM jobs on SLURM Denao	December 12, 2019 16:58 by jherb	2	1,484
		when running tutorial: Permission denied collect2: ld returned 1 exit status semaviso	December 12, 2019 11:03 by jairoandres	3	4,561
		Help Please hector18	December 11, 2019 06:35 by hector18	2	828
		Is it possible to time lag turbulentTemperatureCoupledBaffleMixed? student_cfd	December 11, 2019 04:57 by Bloerb	1	829
		Verification and Validation Mesh done with snappy antoniomollo	December 11, 2019 04:32 by Bazinga	1	962
		Changing BC's After Crash and Continuing from the latestTime kopernik	December 11, 2019 02:47 by kopernik	2	732
		k, epsilon, nut in buoyantBoussinesqPimpleFoam for laminar flows Sedullo	December 10, 2019 18:06 by Sedullo	2	1,218
		Help to make LES simulation faster Pj.	December 10, 2019 05:13 by Santiago	14	3,715
		Curved a Mesh - negative initial temperature error in chtMultiRegionFoam mbranag	December 9, 2019 18:06 by mbranag	2	1,017
		timeVaryingMappedFixedValue problems within rhoCentralFoam for Blasius Solution joshkellyjak	December 9, 2019 14:00 by joshkellyjak	0	821
		pimpleFoam is right, how about solids4Foam pimpleFluid? amuzeshi	December 9, 2019 11:55 by Daniel_Khazaei	6	1,259
		Outlet pressure as new boundary condition Magistrane	December 9, 2019 10:53 by Magistrane	0	636
		error when i change from 1 inlet to 2 flowwwww	December 9, 2019 10:48 by flowwwww	0	673
		Restart simulation with different inflow cmgotelli	December 9, 2019 09:11 by cmgotelli	12	1,634
		Trouble with fvSchemes - Help needed andrewlindsay	December 9, 2019 03:13 by andrewlindsay	3	845
		Vortices at mass Flow outlet simulating an s-duct Oliver Stephan	December 7, 2019 21:06 by Bodo1993	1	854
		Pressure force calculation in incompressible solvers philippose	December 7, 2019 05:51 by cyberpr123	10	12,837
		Open Channel Flow Simulation physicosm	December 6, 2019 08:06 by physicosm	0	1,129
		Strange velocity field while using waves2Foam gnaknait	December 5, 2019 17:32 by Xiangli_strathclyde	1	932
		Surface reaction with reacting foam Benben	December 5, 2019 08:41 by Yujuan	9	2,837
		Problem with chtMultiRegionSimpleFoam andrewlindsay	December 4, 2019 20:46 by andrewlindsay	0	750
		Boat hydrodynamic forces estimation CFD_fan	December 4, 2019 19:12 by mAlletto	1	1,244
		Crash with renumberMesh and pimpleFoam LES jmt	December 4, 2019 16:31 by jmt	0	1,114
		CHT +viewfactor model condensatoalcioccolato	December 4, 2019 13:17 by peterhess	16	2,832
		rhoSimpleFoam Spalart Allmaras simulation issue mariloo	December 4, 2019 12:09 by mariloo	0	774
		Heat transfer coefficient/heat flux BC buffi	December 4, 2019 09:05 by rohan1495	1	1,094
		The difference of cyclic boundry condition and mapped boundary condition caitao	December 4, 2019 08:29 by kiski	1	2,051
		set random seeding at run-time anishtain4	December 4, 2019 07:24 by jorkolino	1	1,139
		Problems running OpenFOAM 2.3 in parallel vinz	December 3, 2019 12:03 by mm66	7	3,776

Read this first: How to ask a question on the forums

Page 140 of 492 « First < 40 90 130 138 139 140 141 142 150 190 240 > Last »

Display Options

Showing threads 5561 to 5600 of 19641

Sorted By Thread Title Last Post Time Thread Start Time Number of Replies Number of Views Thread Starter Thread Rating Sort Order Ascending Descending From The Last Day Last 2 Days Last Week Last 10 Days Last 2 Weeks Last Month Last 45 Days Last 2 Months Last 75 Days Last 100 Days Last Year Beginning

Forum Tools	Search this Forum
Mark This Forum Read View Parent Forum	Search this Forum : Advanced Search

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules