OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
Model air humidity around a pool with passive scalar Rojj	June 25, 2016 03:23 by Rojj	1	1,255
OpenFoam solvers and setups for pump simulation coloursfordirectors	June 25, 2016 02:41 by coloursfordirectors	0	889
rhoCentralFoam parallel running hbrist7	June 24, 2016 13:51 by hbrist7	0	965
twoPhaseEulerFoam diverging avila.vc	June 24, 2016 12:36 by jason	11	3,098
How to choose relaxation factor for pressure solver mushtime	June 24, 2016 11:51 by mushtime	0	797
SimpleFoam setting with total pressure at inlet dmaz	June 24, 2016 10:17 by Jack001	2	1,953
Combustion ( 1 2 3 ... Last Page) Chalothon Thumthae (Thumthae)	June 24, 2016 06:16 by adrieno	126	26,901
Solving for a long geometry Nkl	June 24, 2016 05:21 by Nkl	2	750
Time step and CFL requirments for pimpleFoam case? CFD-Lover	June 23, 2016 23:33 by CFD-Lover	6	1,284
interFoam (HELYX-OS) pressure boundary conditions SFr	June 23, 2016 16:36 by Pndsc	8	3,453
Running in Parallel with overlapping region aghsin	June 23, 2016 04:26 by aghsin	0	606
Fully developed outlet BC xuegy	June 23, 2016 04:00 by RodriguezFatz	4	1,132
What solver for particle tracking in transient flow? casesam	June 23, 2016 03:39 by Alaska1964	2	1,049
Forced flow on upper surface of a wing dusanstan	June 22, 2016 15:27 by dusanstan	0	624
fan BC to simulate turbine palgroth	June 22, 2016 14:23 by palgroth	0	666
bouyantpressure and fixedFluxPressure milad653279	June 22, 2016 11:44 by mo_na	2	2,528
Cant find convergence miku11	June 22, 2016 08:53 by RodriguezFatz	1	671
Turbulent mixing of two liquids zimon	June 22, 2016 06:39 by Coris	6	2,707
OpenFOAM on a Odroid C1 ARM cluster cico0815	June 22, 2016 02:49 by cico0815	6	2,735
error with reactingFoam BakedAlmonds	June 22, 2016 02:21 by ybapat	4	2,548
mdFoam, FOAM FATAL IO ERROR NaderNekoubin	June 21, 2016 21:25 by NaderNekoubin	0	746
Floating point exception error (core dumped) mechesanjiv	June 21, 2016 15:44 by brg_mohajer	2	1,690
PotentialFOam sampathevs	June 21, 2016 10:32 by masoudsh	5	2,086
Density Modelling Problems in Compressible Case McCharles	June 21, 2016 10:17 by McCharles	0	727
OF pressure units??? sahmed	June 20, 2016 16:40 by sahmed	3	1,774
simpleFOAM: Instability problems, divergens etc... Tips (Need your input too) magjohan	June 20, 2016 16:10 by masoudsh	11	3,160
plot over time paraview foamiste	June 20, 2016 12:18 by foamiste	0	795
How to run OpenFoam using openMP. bravikanth	June 20, 2016 10:11 by xuhuang	12	8,005
Velocity component averaging in ParaView jet_engine	June 20, 2016 07:05 by rapierrz	1	2,251
problem with the filling of a bottle giack	June 20, 2016 05:35 by fluidmobil	2	1,820
rhoSimpleFoam error ullal	June 18, 2016 17:08 by ullal	0	858
contact angle behavior in micro & nano dimensions Jimbomet	June 18, 2016 16:18 by bigfeather	7	2,178
kklOmega omega boundary condition at the wall - OF3.0 Artur	June 17, 2016 15:42 by malv83	1	2,522
Airfoil lift and drag using k-kl-omega turbulence model hylleman	June 17, 2016 15:10 by malv83	6	3,057
kkl-omega coefficients ChrisPro	June 17, 2016 15:09 by malv83	9	4,092
k-kl-omega not producing any transition Kina	June 17, 2016 15:05 by malv83	1	932
K-kl Omega Transition Model Ranjan	June 17, 2016 14:44 by malv83	13	4,691
k-kl-omega Turbulence Model doubt: shereez234	June 17, 2016 14:41 by malv83	3	2,944
[OpenFOAM-2.1.0] kklOmega RAS Turbulence Model (low Re) ( 1 2 3 ... Last Page) alquimista	June 17, 2016 14:39 by malv83	64	23,320
Problem getting Parabolic profile in pipe flow sahmed	June 17, 2016 11:42 by sahmed	0	877

Read this first: How to ask a question on the forums

Page 235 of 480

235

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 10:12.