OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
reactingFoam gas not dispersing as expected twinturbotom	May 23, 2015 11:23 by flowAlways	2	1,729
LES mapped inlet canopus	May 22, 2015 20:33 by canopus	0	1,007
MRFSimpleFoam - Selection of rotating region Ivanet	May 22, 2015 09:17 by be_inspired	8	7,774
Porblem getting resonable results using KomegaSST for an airfoil case tareqkh	May 22, 2015 06:16 by Alhasan	1	944
two phase flow with condensation in supersonic nozzle with OpenFOAM foroozan	May 22, 2015 05:05 by foroozan	2	1,330
Error using rhoCentralFoam carserg92	May 22, 2015 04:21 by T.D.	3	1,696
30P30N Multielement Airofil - Lift and Drag Coeff. Alhasan	May 21, 2015 14:40 by tareqkh	1	2,138
Errors/warnings about missing metis-files when using decomposePar sita	May 21, 2015 06:17 by sita	0	933
openFoam 2.2.0 & dynamicTopoFvMesh vasava	May 21, 2015 03:33 by PicklER	8	1,974
Floating point exception in tutorials case xujr	May 21, 2015 03:31 by xujr	0	1,063
decomposePar won't break case for 8 cores Outbound	May 20, 2015 21:04 by Outbound	2	4,219
what solver for air cyclone simulation comingdaytime	May 20, 2015 12:12 by arjun	2	1,447
mpirun error when using -parallel option TToku	May 19, 2015 09:46 by TToku	0	783
Condensation using OpenFOAM ARUN K RAJ	May 19, 2015 08:53 by Kanarya	11	4,433
No Slip condition Not working NightWing	May 18, 2015 16:13 by wyldckat	1	1,367
Varying times during MPI parallel runs d_ray	May 18, 2015 11:31 by d_ray	0	932
why interPhaseChangeFoam has much smaller timestep than interFoam? gaza	May 18, 2015 09:16 by gaza	0	769
About the standard k-omega model Yuby	May 17, 2015 10:17 by Yuby	0	764
Error in tutorial cavitatingFoam v.2.3.x alvariten	May 16, 2015 13:05 by alvariten	2	1,205
Segmentation fault in chtMultiRegionSimpleFoam zerenz	May 16, 2015 11:56 by wyldckat	1	849
k-epsilon turbulence model fijinx	May 16, 2015 11:26 by Joao Lopes	9	14,669
liftDir and dragDir for multi elemet airfoils s.m	May 15, 2015 14:28 by Alhasan	1	1,437
Time step too small with maxCo=1 fernexda	May 15, 2015 10:05 by fernexda	5	3,298
How are the integration constants for the JANAFthermo class derived? tomf	May 15, 2015 07:47 by tomf	2	1,514
Number of particle injection with time varying camzis	May 15, 2015 05:46 by camzis	0	831
Run TIme Error avd28	May 14, 2015 13:40 by avd28	0	1,326
volume conservation and accurate interface shape Prosper	May 14, 2015 09:47 by Prosper	9	1,334
Inviscid transonic diverging nozzle flow karamiag	May 13, 2015 14:40 by karamiag	0	745
calculation of the curl Roman1	May 13, 2015 11:00 by Roman1	0	943
Problem with rotating and non rotating bc's in SRFSimpleFoam and MRFSimpleFoam jcespada	May 13, 2015 10:39 by masterd-@gmx.de	2	1,550
SonicFOAM: field fluctuations at high pressure in 2D Lena_K	May 13, 2015 08:44 by Lena_K	0	1,053
Improved solver data output / tracking / visualization chriss85	May 13, 2015 07:55 by chriss85	1	1,342
pimpleDyMFoam error message laurentb	May 13, 2015 05:48 by louisgag	7	1,940
initialization of scalar source using volume integral of source cells letzel	May 13, 2015 03:58 by wayne14	2	1,719
Source Term in Canyon Simulations asharma	May 13, 2015 03:51 by wayne14	2	1,435
simpleFoam - pressure (coefficient) of head shape GJM1991	May 12, 2015 17:15 by taxalian	4	1,685
Problem with the cyclic condition bargiola	May 12, 2015 13:00 by bargiola	0	862
Particle Injection camzis	May 12, 2015 11:58 by camzis	0	638
fvc::grad(U) in interFoam K.C.	May 12, 2015 10:57 by danny123	3	2,199
sonicFoam: simulation "stuck" without error Lena_K	May 12, 2015 10:04 by Lena_K	2	1,549

Read this first: How to ask a question on the forums

Page 274 of 480

274

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 01:03.