OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
Problems in my first attempt with chtMultiRegionSimpleFoam zfaraday	April 8, 2014 18:20 by zfaraday	1	2,354
Same case run twice I got different results, what's going wrong? lakeat	April 8, 2014 15:02 by lakeat	10	2,214
dynamic fluid mesh inside, while fracture propogates codder	April 8, 2014 10:20 by xiaoqiang12	4	1,702
waveTransmissive Boundary condition for rho? dancfd	April 7, 2014 22:03 by dancfd	0	1,664
Points on cyclicAMI patch "sticking" to rotating neighbor patch pbachant	April 7, 2014 21:40 by pbachant	1	982
Weird transverse velocity in a channel dancoz87	April 7, 2014 17:16 by dancoz87	0	1,074
porousInterFoam - solving error przesmak	April 7, 2014 14:51 by przesmak	2	1,399
simpleFoam with kOmegaSST ilpaso	April 7, 2014 06:12 by RodriguezFatz	11	2,229
Error at ??:? Benji	April 7, 2014 06:07 by Benji	5	1,304
Dynamic Lagrangian - wiggles on unstructured grid Atoom	April 7, 2014 06:07 by vut	6	1,785
problem about sonicFoam naca airfoil hamed_m313	April 6, 2014 10:23 by hamed_m313	0	1,404
Running MPI on 2 laptops ahsan_smme.nust@yahoo.com	April 5, 2014 20:26 by wyldckat	15	5,237
Flow in compessor simulation Seroga	April 5, 2014 16:46 by Seroga	1	1,290
Problem with running mixedSmagorinsky sgs hamsteri15	April 5, 2014 13:11 by vut	3	1,179
MixedSmagorinsky parallel mode blows up with libOpenFOAMso error kumar2	April 5, 2014 04:09 by vut	2	1,729
Interfoam water flowing uphill Brians200	April 4, 2014 17:43 by ngj	10	2,810
Simple gas flow through pipe mikeR	April 4, 2014 10:20 by mikeR	1	1,086
icoFoam solver error Mahmoud_aboukhedr	April 4, 2014 07:28 by Mahmoud_aboukhedr	0	1,821
How can I get the pressure gradient along the direction normal to the local wall surface qtian	April 4, 2014 05:05 by spam3c	3	7,701
dieselFoam ugpotdar	April 4, 2014 04:11 by ugpotdar	0	936
Foam-3.0-ext + transientSimpleDyMFoam lentschi	April 3, 2014 07:52 by Mojtaba.a	2	1,208
some error occurred while simulating Flow Around A Cylinder ngoducphi12761	April 3, 2014 05:55 by ngoducphi12761	2	1,132
MRF crash Ruli	April 2, 2014 15:55 by Ruli	3	1,732
Problem with rotating frame(capillary) 30na	April 2, 2014 11:16 by 30na	0	1,024
manualInjection model in sprayFoam Mentalo	April 2, 2014 09:29 by ansubru	1	4,222
Multiregion BlockMesh Run Problem EFoster2	April 2, 2014 08:52 by EFoster2	2	1,697
pimpleFoam initialization? TBERGE	April 2, 2014 08:20 by TBERGE	2	3,220
simulation kivatest -parallel simulation vitorspadeto	April 2, 2014 05:30 by jherb	2	1,140
SprayFoam ugpotdar	April 1, 2014 23:19 by ugpotdar	2	1,515
dieselFoam ugpotdar	April 1, 2014 09:45 by ugpotdar	0	827
boundary conditions, pipe geometry. ilpaso	April 1, 2014 05:34 by alexeym	5	1,148
velocity profile concave ramana468	April 1, 2014 04:32 by ramana468	3	1,334
Adaptive mesh refinement using simpleFOAM avinashjagdale	April 1, 2014 00:39 by avinashjagdale	4	2,803
Wall interaction luc.gig	March 31, 2014 15:26 by luc.gig	0	1,333
simpleFoam no convergence ilpaso	March 31, 2014 10:52 by ilpaso	19	7,912
One phase is compressible, can I use compressibleinterfoam? sharonyue	March 31, 2014 09:40 by olivierG	2	2,205
Foam-3.0-ext + MixingPlane Problems lentschi	March 31, 2014 08:40 by lentschi	3	1,735
chtMultiRegionSimpleFoam for high velocity and pressures prameelar	March 31, 2014 04:16 by vasava	1	1,432
slip boundary's equation. sharonyue	March 31, 2014 03:50 by sharonyue	8	1,438
Unsteady MRFSimpleFoam? Ruli	March 30, 2014 13:46 by Kaskade	11	2,733

Read this first: How to ask a question on the forums

Page 324 of 493

324

Forum Tools	Search this Forum
Mark This Forum Read View Parent Forum	Search this Forum : Advanced Search

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 04:20.