OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
Flow past rotating cylinder sam.ho	October 10, 2013 07:49 by sam.ho	4	2,411
Is rhoCentralFoam Not Analyzing All My Points? Foamaholic	October 9, 2013 18:05 by Foamaholic	1	1,157
Estimating error for the incompressible turbulent flow imano	October 9, 2013 16:04 by be_inspired	8	2,552
Convergence Problems using Spalart Allmaras recnice	October 9, 2013 12:19 by baratian	3	3,292
edcSimpleFoam grk34	October 9, 2013 06:09 by PeterBishop	4	3,183
Use DNS on engineFoam Chapelle	October 9, 2013 05:31 by Chapelle	0	1,286
Thermal damBreak with interFoam not working... einatlev	October 8, 2013 17:52 by einatlev	0	1,458
Doubt in scalarTransportFoam... AB08	October 8, 2013 07:41 by Hiroshiman	5	3,605
LduMatrix<Type, DType, LUType> behnamnasr	October 8, 2013 06:01 by behnamnasr	1	1,382
chtMultiRegionFoam, conduction with a contact resistance between two solids romain.h	October 8, 2013 01:25 by pangelo	1	1,782
divScheme for recirculating flows babakflame	October 8, 2013 01:05 by babakflame	2	1,313
Centrifugal separator simulation RicardoLB	October 7, 2013 03:40 by RicardoLB	2	2,619
Solving Flow past Square Cylinder sam.ho	October 6, 2013 23:34 by sam.ho	3	1,592
"wingMotion" using air instead of water jvd.mechanic	October 6, 2013 21:28 by jvd.mechanic	2	1,493
How to add Exner equation in settlingFoam jimbean	October 6, 2013 09:59 by jimbean	1	2,298
kOmegaSST gets the results stalled too early Juansheng	October 6, 2013 05:01 by Juansheng	1	2,047
Problem with parallel run of my solver based on pimpleDyMFoam o.kotsur	October 6, 2013 03:44 by o.kotsur	0	1,845
RhoPiso Algorithm babakflame	October 6, 2013 01:44 by babakflame	0	1,159
setup new filed in createFileds.H in pisoFoam hiuluom	October 5, 2013 22:19 by hiuluom	8	1,515
polynomialTransport & hPolynomialThermo GRAUPS	October 5, 2013 12:18 by novakm	5	2,162
printstack with interFoam solver for a simple droplet on a flat plate mebinitap	October 5, 2013 10:13 by duongquaphim	19	4,521
interDyMFOAM with moving mesh bojiezhang	October 5, 2013 08:13 by wyldckat	3	2,053
Automatic Mesh Refinement in OpnFOAM-1.6-ext Daniel_Khazaei	October 4, 2013 17:48 by Daniel_Khazaei	0	1,323
Thin Wall Heat Transfer BC for rhoSimpleFoam swahono	October 4, 2013 11:49 by Chrisi1984	12	7,130
trouble with `pressureDirectedInletVelocity' yohey	October 4, 2013 11:15 by akashjangid	2	4,486
simpleFoamResidual File	October 4, 2013 10:50 by File	2	1,684
interPhaseChangeFoam vishal_s	October 4, 2013 05:28 by olivierG	7	2,042
FvMatrix coefficients shrina	October 3, 2013 14:38 by luckycfd	10	10,273
thermal stratification and interface pahse-change wolfindark	October 3, 2013 06:18 by ignacio	2	1,734
PatchToPatchInterpolationfaceInterpolate ( 1 2) cosimobianchini	October 2, 2013 14:27 by styleworker	26	4,975
LES with chtMultiRegionFoam ignacio	October 2, 2013 09:04 by ivfuente	5	1,531
Omega goes infinity callumso	October 2, 2013 07:52 by RodriguezFatz	5	3,182
To Plot Residuals on the fly. neeraj	October 2, 2013 06:23 by File	5	10,214
pisoFoam error at t= 0.44 seconds: how to debug? jr33	October 2, 2013 00:59 by jr33	1	1,204
Setup of files for turbulent flow Tensian	October 1, 2013 12:36 by Many	7	1,506
How to stablish correct pressure difference in simpleFoam Tensian	October 1, 2013 07:17 by Tensian	0	1,037
TimeVaryingUniformFixedValue b.c. merlyn	October 1, 2013 03:45 by Hale	3	5,267
Solver for steady state compressible multispecies non-reacting flow? inf.vish	October 1, 2013 01:09 by inf.vish	0	1,271
Log-time writeInterval for PimpleFoams JR22	September 28, 2013 11:23 by wyldckat	2	2,427
Using interDyMFoam with a static mesh Nazanin	September 28, 2013 11:03 by wyldckat	3	2,002

Read this first: How to ask a question on the forums

Page 342 of 495

342

Forum Tools	Search this Forum
Mark This Forum Read View Parent Forum	Search this Forum : Advanced Search

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 05:15.