CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Verification & Validation (https://www.cfd-online.com/Forums/openfoam-verification-validation/)
-   -   store release simulation (https://www.cfd-online.com/Forums/openfoam-verification-validation/158990-store-release-simulation.html)

corger September 7, 2015 07:41

store release simulation
 
I have written a stand-alone store release simulation computer program (Fortran) which operates in the OpenFOAM environment and calls various OpenFOAM functions (snappyHexMesh and various OpenFOAM solvers). Validation was successfully done for two sets of data: CFD Challenge II flight test data and NEAR windtunnel data. Does anyone have other store release data that I can use for validation? Probably best to email me.:)

corger September 16, 2015 03:33

store release simulation - update
 
Referring to my earlier post, I forgot to attach the draft document that reports on my results so far. I tried to attach it now but notice that the file size is way too large (about 1Mb). So, if you would like to obtain this document you must email me at corger@mweb.co.za . By the way, I still would appreciate any additional experimental store release data that I could include.
Regards,
Gerrit

corger February 25, 2016 03:28

store release simulation - report
 
For convenience the report can be downloaded from the link:

https://www.dropbox.com/s/7wcohifsozrgqzh/OFrelease.doc?dl=0


All times are GMT -4. The time now is 12:26.