interFoam: validation of interFoam for drop production in a microfluidic device

mehdi12 · March 25, 2017, 15:10

Hello all,

I would like to share our work on droplet production in microfluidic T-junction. In this work, we have performed 3D simulations in parallel to validate the performance of interFoam solver. The title of the paper is : "Volume-of-fluid simulations in microfluidic T-junction devices: Influence of viscosity
ratio on droplet size". Here is the link of the paper:
http://aip.scitation.org/doi/pdf/10.1063/1.4978801

Best regards,

veerag96 · April 14, 2017, 09:38

Hello,

I have read your work that you have shared in this forum. It was wonderful and inspiring. I am also working on a somewhat similar problem. I am not able to get break up of the droplet. Is it possible for you to share your OpenFOAM case file in this thread? It would be helpful for many people working on the problem similar to yours. Please share with us it would be really helpful.

March 25, 2017, 15:10	interFoam: validation of interFoam for drop production in a microfluidic device	#1
mehdi12 New Member Join Date: Jan 2013 Posts: 2 Rep Power: 0	Hello all, I would like to share our work on droplet production in microfluidic T-junction. In this work, we have performed 3D simulations in parallel to validate the performance of interFoam solver. The title of the paper is : "Volume-of-fluid simulations in microfluidic T-junction devices: Influence of viscosity ratio on droplet size". Here is the link of the paper: http://aip.scitation.org/doi/pdf/10.1063/1.4978801 Best regards, ashish.vinayak and tonnykz like this.

April 14, 2017, 09:38		#2
veerag96 New Member Join Date: Apr 2016 Posts: 2 Rep Power: 0	Hello, I have read your work that you have shared in this forum. It was wonderful and inspiring. I am also working on a somewhat similar problem. I am not able to get break up of the droplet. Is it possible for you to share your OpenFOAM case file in this thread? It would be helpful for many people working on the problem similar to yours. Please share with us it would be really helpful. tonnykz, Anik122 and GregNordin like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
interFoam - validation for bubble/droplet flows in microfluidics	duongquaphim	OpenFOAM Verification & Validation	54	February 13, 2023 23:46
interFoam validation for coolant flow in fusion Reactor	vipin1431	OpenFOAM Verification & Validation	2	March 23, 2016 01:10
[ANSYS Meshing] Microfluidic Device Meshing	mlau3	ANSYS Meshing & Geometry	1	July 25, 2014 00:19
CFX problem in ubuntu (linux)	Vigneshramaero	CFX	0	July 13, 2012 10:22
CFX-Pre problem, pls help!!!	cth_yao	CFX	0	February 17, 2012 00:52