CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Verification & Validation

Oscillations in 2D channel symmetric?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 19, 2019, 02:43
Default Oscillations in 2D channel symmetric?
  #1
Senior Member
 
Josh McCraney
Join Date: Jun 2018
Posts: 163
Rep Power: 4
joshmccraney is on a distinguished road
Hi all!

I'm running a damBreak tutorial with a slightly different geometry (see below)

Attachment 71669

However, once I run this quickly becomes asymmetric. Any ideas why?
joshmccraney is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Difference between Axisymmetric and Symmetric Boundary condition AS_Aero FLUENT 1 January 25, 2019 09:51
Channel flow with symmetry Plane not symmetric Hillie OpenFOAM Running, Solving & CFD 0 May 19, 2017 22:32
Enabling Open Channel Flow Sub-Model in Mixture model cod213 FLUENT 0 January 10, 2017 13:40
interFoam Micro channel 1988 OpenFOAM Running, Solving & CFD 1 January 25, 2015 13:50
Question on the boundary condition for open channel flow, please help! ripperjack OpenFOAM Running, Solving & CFD 0 September 13, 2013 11:44


All times are GMT -4. The time now is 21:28.