|
[Sponsors] |
The results of the viv numerical simulation do not match the results of the paper |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 5, 2020, 01:28 |
The results of the viv numerical simulation do not match the results of the paper
|
#1 |
New Member
千悦
Join Date: Sep 2020
Posts: 1
Rep Power: 0 |
Dear friends, I used pimpledymfoam to make a laminar flow single cylinder viv based on page 79 of this paper, with a Reynolds number of 500 and a diameter of 0.5. There are most of the codes behind this paper, and my grid is as close to the paper as possible. However, the value is not correct, and his results cannot be reproduced. I don't know where the problem occurred. The following is this paper and my calculation example。the paper name is 《CFD simulation of the flow over a 2-dimensional pipe and vortex induced vibration of the pipe with 1 degree of freedom》 load from here https://core.ac.uk/display/30923184。Thanks a lot for reply
my result http://m.qpic.cn/psc?/57cc5d5f-c91b-...Q!&rf=viewer_4 my mesh http://a1.qpic.cn/psc?/57cc5d5f-c91b...-2&rf=viewer_4 his result http://m.qpic.cn/psc?/57cc5d5f-c91b-...0!&rf=viewer_4 Last edited by zxh666hahah; September 5, 2020 at 03:51. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Difference between 2D and 3D simulation results | Tuck | FLUENT | 2 | January 9, 2021 17:43 |
Results of an axisymmetric simulation in Fluent | ShimiSan | FLUENT | 0 | July 19, 2016 09:20 |
on curved channel flow numerical results | yfyap | Main CFD Forum | 4 | February 8, 2011 04:44 |
gmsh2ToFoam | sarajags_89 | OpenFOAM | 0 | November 24, 2009 22:50 |
Experimental & numerical results | Amy | CFX | 2 | September 1, 2005 08:52 |