pimpleFoam – validation of square jet seabed scour numerical model
The thread is dedicated to validation of the pimpleFoam solver against the problem of seabed scour numerical modelling:
Subhasish D., and Arindam S. Scour Downstream of an Apron Due to Submerged Horizontal Jets//J. Hydraul. Eng. 2006.132:246-257 Several models of bed scour are considered. All necessary data is stored in GitHub repository: https://github.com/unicfdlab/rfbr-nsfc-2021 |
Dear Matvey,
Thanks a lot for this; however, I couldn't see any available data in the repo. Would you mind to double check whether the repo contains the data required? |
Validation of scouring model starts with validation of high Re planar jet flow model (backward face step): https://github.com/unicfdlab/rfbr-ns...rd-facing-step.
It was shown previously that error in seabed height is in quadratic proportion to error of wall shear stresses. |
All times are GMT -4. The time now is 09:39. |