[OpenFOAM.org] libscotch.so missing

anon_a · April 24, 2012, 09:38

Hello everyone

While trying to fix something that was not even broken (

) I managed to make my decomposePar stop working. Here is the message I get:

Quote:

decomposePar: error while loading shared libraries: libscotch.so: cannot open shared object file: No such file or directory

I searched a little bit around the forum and even though some posts helped me with other issues, I could not get pass this one. I am also confused because:
- even though "rpm -q scotch" reports that it is not installed, I could run decomposePar without problems yesterday
- I don't use scotch but a simple decomposition. But I did try to switch to scotch yesterday.

Some information that may help:
Linux version 2.6.32.46-0.3-default
gcc version 4.3.4, SUSE Linux
OF v2.1.0

wyldckat · April 24, 2012, 19:00

Greetings anon_a,

Mmm, by your description, it looks like you are using the RPM version of OpenFOAM for SuSE and openSUSE.
Depending on your system architecture, have you tried installing Scotch again as indicated here: http://www.openfoam.org/download/suse.php - namely the point that starts with this text:

Code:

3. EITHER, download and install Scotch, Paraview and OpenFOAM for 32 bit

The other hypothesis is that you might have built OpenFOAM 2.1.0 from source, as explained here: http://www.openfoam.org/download/source.php - in this case, it would only be a matter of running "Allwmake" once again.

Best regards,
Bruno

anon_a · April 25, 2012, 04:13

Thanks Bruno.
You were right, I had compiled from source (and thus the rpm command was totally stupid but I guess I was too tired and frustrated :-) )
./Allwmake solved my problem.

david112 · April 6, 2017, 05:12

5 years later it still solves the problem. Thanks for this thread!

April 24, 2012, 19:00		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings anon_a, Mmm, by your description, it looks like you are using the RPM version of OpenFOAM for SuSE and openSUSE. Depending on your system architecture, have you tried installing Scotch again as indicated here: http://www.openfoam.org/download/suse.php - namely the point that starts with this text: Code: 3. EITHER, download and install Scotch, Paraview and OpenFOAM for 32 bit The other hypothesis is that you might have built OpenFOAM 2.1.0 from source, as explained here: http://www.openfoam.org/download/source.php - in this case, it would only be a matter of running "Allwmake" once again. Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] missing internal faces and uncovered faces after redifining parts containing surface.	grv	ANSYS Meshing & Geometry	2	December 9, 2016 04:38
[Other] paraFoam error	scybchenjun	OpenFOAM Meshing & Mesh Conversion	0	May 11, 2016 23:25
what is syntax error : missing ')' before ';'	aleisia	Fluent UDF and Scheme Programming	8	March 10, 2015 15:42
[OpenFOAM] Xlib: extension "GLX" missing on display	goldbeard	ParaView	5	March 24, 2013 13:12
errors when installing openfoam2.1 on ubuntu12.o4	hewei	OpenFOAM Installation	5	May 29, 2012 07:43

April 25, 2012, 04:13		#3
anon_a Disabled Join Date: Mar 2011 Posts: 174 Rep Power: 15	Thanks Bruno. You were right, I had compiled from source (and thus the rpm command was totally stupid but I guess I was too tired and frustrated :-) ) ./Allwmake solved my problem.

April 6, 2017, 05:12		#4
david112 New Member David Kinast Join Date: Nov 2016 Posts: 15 Rep Power: 9	5 years later it still solves the problem. Thanks for this thread!