foam data to Ansys

lg88 · July 3, 2012, 03:25

hello everyone
I want to use the output file from openFOAM as the input file of Ansys Mechanical. Can you tell me how to transfer the file format?

regards!
lg88

wyldckat · July 3, 2012, 05:59

Hint: search for "foamDataToFluent"

elvis · July 3, 2012, 09:33

Hi,

are you interested in Fluid Structure Interaction (FSI)? Looks if you want to go in that direction?
The fool proof solution is to use mpcci but it not for free ;-) => http://www.mpcci.de/mpcci-descriptio...e-adapter.html . I think they offer highschool prices as well if that is the case for you.

Some tutorials and presentations on FSI
http://www.extend-project.de/OFWS/tr...mbardi_FSI.pdf
http://www.extend-project.de/ofw7-technical-program A Strongly Coupled Fluid-Structure Interaction Model for Wind-Sail Simulation;

Hrv Jasak also pointed out (http://www.extend-project.de/ofw7-training =>Multiphysics Simulation - Inter-Region and Inter-Equation Coupling in OpenFOAM) that GGI is a good Tool for the interpolation of non conforming meshes

The final presentations are not available yet.

July 3, 2012, 03:25	foam data to Ansys	#1
lg88 Member jack Join Date: Jul 2011 Posts: 52 Rep Power: 14	hello everyone I want to use the output file from openFOAM as the input file of Ansys Mechanical. Can you tell me how to transfer the file format? regards! lg88

July 3, 2012, 05:59		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Hint: search for "foamDataToFluent" __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] mesh airfoil NACA0012	anand_30	OpenFOAM Meshing & Mesh Conversion	13	March 7, 2022 17:22
[CGNS] CGNS converters available	mbeaudoin	OpenFOAM Meshing & Mesh Conversion	137	December 14, 2018 04:20
[blockMesh] error message with modeling a cube with a hold at the center	hsingtzu	OpenFOAM Meshing & Mesh Conversion	2	March 14, 2012 09:56
Problem in running ICEM grid in Openfoam	Tarak	OpenFOAM	6	September 9, 2011 17:51
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11

July 3, 2012, 09:33		#3
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hi, are you interested in Fluid Structure Interaction (FSI)? Looks if you want to go in that direction? The fool proof solution is to use mpcci but it not for free ;-) => http://www.mpcci.de/mpcci-descriptio...e-adapter.html . I think they offer highschool prices as well if that is the case for you. Some tutorials and presentations on FSI http://www.extend-project.de/OFWS/tr...mbardi_FSI.pdf http://www.extend-project.de/ofw7-technical-program A Strongly Coupled Fluid-Structure Interaction Model for Wind-Sail Simulation; Hrv Jasak also pointed out (http://www.extend-project.de/ofw7-training =>Multiphysics Simulation - Inter-Region and Inter-Equation Coupling in OpenFOAM) that GGI is a good Tool for the interpolation of non conforming meshes The final presentations are not available yet.