CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM (https://www.cfd-online.com/Forums/openfoam/)
-   -   Mesh quality (https://www.cfd-online.com/Forums/openfoam/104901-mesh-quality.html)

senol July 18, 2012 07:36
Mesh quality
 
3 Attachment(s)
Hi friends,

I made a mesh that was converted from solidworks ".stl" by snappyhexmesh. The result mesh is not bad but in some points there is some unwanted meshes , how can fix it.

Attachment 14586Attachment 14588Attachment 14587

jhoepken July 18, 2012 09:47
My guess is that these points are not really present in your mesh, but paraview introduces them for displaying purposes. Converting the mesh to VTK (foamToVTK) and displaying the VTK instead of the native OpenFOAM format might help with that, but I am not totally sure about that.

senol July 19, 2012 07:29
Firstly thank you for your reply. I guess you are right, i did what you said and the result is ok.


All times are GMT -4. The time now is 16:42.