CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM (https://www.cfd-online.com/Forums/openfoam/)
-   -   OpenFoam -Marine applications (https://www.cfd-online.com/Forums/openfoam/105295-openfoam-marine-applications.html)

stcz July 27, 2012 03:15

OpenFoam -Marine applications
 
Hi,
I am quite new in OpenFoam. I am looking for help according the OpenFoam for marine applications. I am interested in two phase flow calculations (VOF) with free surface and runing trim and sinakge. i am looking for anyone who has experience in model meshing and runing calculation. I am open to discuss the cooperation with people who owns module/script implemented into OpenFoam for that kind of calculations / postprocesing.
Regards

sail July 28, 2012 17:49

Hello stcz.

I belive i fall in your requirements. what kind of collaboration were you thinking about? do you have any specific issues?

stcz August 3, 2012 05:25

Hi
I am trying to learn as much as possible about the OpenFoam. At the moment I am using SnappyHexMesh tool for meshing - and for sure I need some guide thru that. Because my calculations are failed in Openfoam.
So at the moment I have some questions:
1. is it possible to apply standard OpenFoam with SnappyHexMesh tool for marine applications (free surface, dynamic trimming) or I have to get some scripts / module to do that kind of calculations.
2. do you have experience with that kind calculations? can you send me some references?
3. I assume you are expert (both meshing, pre, solver and postprocessing) - are you open to share your knowledge via online / face to face course?
regards


Quote:

Originally Posted by sail (Post 374140)
Hello stcz.

I belive i fall in your requirements. what kind of collaboration were you thinking about? do you have any specific issues?



All times are GMT -4. The time now is 15:43.