Minimum Signed Distance from .stl file

Wichard · August 21, 2012, 09:53

Hello everyone

I am brand new to both openFoam and the CFD-online comunity, so please bear with me if my questions are a bit simple.

I am working on interface tracking for capturing the grain regression of SRM's using LSM. given an initial .stl file how will I go about generating a minimum signed distance (MSD) function around this geometry?

I have implemented an analytical method in Matlab where for each face (triangle) in the stl file I calculate the distance to each each grid point and so build up the MSD. This is an extremely cumbersome method, made slightly more elegant by excluding gridpoints from the calculation by checking if they are closer to neighbouring faces using exclusion planes. It remains a very un effecient method.

Another Idea was to use the Fast Marching Method to build the MSD, this would however require that all the gridpoints neighbouring the surface be initialized, and how to locate them is a bit lost on me.

Any help, Ideas, or Advice would be much apreciated!

pvpnrao · June 12, 2017, 15:04

were you able to solve your problem. Can you share the details

August 21, 2012, 09:53	Minimum Signed Distance from .stl file	#1
Wichard New Member Wichard Sullwald Join Date: Aug 2012 Posts: 1 Rep Power: 0	Hello everyone I am brand new to both openFoam and the CFD-online comunity, so please bear with me if my questions are a bit simple. I am working on interface tracking for capturing the grain regression of SRM's using LSM. given an initial .stl file how will I go about generating a minimum signed distance (MSD) function around this geometry? I have implemented an analytical method in Matlab where for each face (triangle) in the stl file I calculate the distance to each each grid point and so build up the MSD. This is an extremely cumbersome method, made slightly more elegant by excluding gridpoints from the calculation by checking if they are closer to neighbouring faces using exclusion planes. It remains a very un effecient method. Another Idea was to use the Fast Marching Method to build the MSD, this would however require that all the gridpoints neighbouring the surface be initialized, and how to locate them is a bit lost on me. Any help, Ideas, or Advice would be much apreciated!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] groovyBC in openFOAM-2.0 for parabolic velocity bc	ofslcm	OpenFOAM Community Contributions	25	March 6, 2017 10:03
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh	gschaider	OpenFOAM Community Contributions	300	October 29, 2014 18:00
"parabolicVelocity" in OpenFoam 2.1.0 ?	sawyer86	OpenFOAM Running, Solving & CFD	21	February 7, 2012 11:44
Problem installing on Ubuntu 9.10 -> 'Cannot open : No such file or directory'	mfiandor	OpenFOAM Installation	2	January 25, 2010 09:50
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00

June 12, 2017, 15:04		#2
pvpnrao Member Pavan Join Date: Jan 2016 Posts: 53 Rep Power: 10	were you able to solve your problem. Can you share the details