|
[Sponsors] |
November 30, 2012, 10:25 |
how to set multi-BC on a internal face?
|
#1 |
New Member
Qing, Cao
Join Date: Nov 2012
Posts: 6
Rep Power: 13 |
Hello guys!
i am totally new with OpenFOAM and I got a problem with the BC setting. Problem: there is some chemical reaction happened on the interface between two blocks. There is some special BC on those faces. But i can not choose those faces and set the "boundary" in the "blockMeshDict", because they are internal faces. How can i do? Should i try the "topoSet" and " createBuffles"? Pls help me, help this poor man... Thanks a lot Qing |
|
December 3, 2012, 03:47 |
|
#2 |
Senior Member
Nima Samkhaniani
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,266
Blog Entries: 1
Rep Power: 24 |
yep, those are good options, look pimpleDyMFoam to see how to use these utilities
__________________
My Personal Website (http://nimasamkhaniani.ir/) Telegram channel (https://t.me/cfd_foam) |
|
December 3, 2012, 04:43 |
|
#3 |
New Member
Qing, Cao
Join Date: Nov 2012
Posts: 6
Rep Power: 13 |
thanks nimasam
i will try it. But i think the "pimpleDyFoam" is a dynamic solver, in my case, there is no "moving part", the reaction surface is exactly between the 2 blockes. Can i maybe use the pimpleFoam or simpleFoam with some specical BC settings? Qing Last edited by Q.Cao; December 3, 2012 at 05:03. |
|
December 3, 2012, 07:10 |
|
#4 |
Senior Member
Nima Samkhaniani
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,266
Blog Entries: 1
Rep Power: 24 |
it would not be a problem
there is a tutorial there, which show you how to change internalFace to patch
__________________
My Personal Website (http://nimasamkhaniani.ir/) Telegram channel (https://t.me/cfd_foam) |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TimeVaryingMappedFixedValue | irishdave | OpenFOAM Running, Solving & CFD | 32 | June 16, 2021 06:55 |
Hydrostatic Pressure and Gravity | miliante | OpenFOAM Running, Solving & CFD | 132 | October 7, 2012 22:50 |
Face set constructors in star cd 4.16 | Ballal | Siemens | 0 | June 6, 2012 09:22 |
[Netgen] Import netgen mesh to OpenFOAM | hsieh | OpenFOAM Meshing & Mesh Conversion | 32 | September 13, 2011 05:50 |
[Commercial meshers] Converting meshes that includes interfaces | ham | OpenFOAM Meshing & Mesh Conversion | 29 | January 8, 2007 08:58 |