CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

is there kind of wall function like this!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 5, 2012, 07:39
Default is there kind of wall function like this!
  #1
New Member
 
Join Date: Dec 2012
Posts: 9
Rep Power: 13
burt is on a distinguished road
hi there,
I have been engaging in openfoam study. Obviously I am not that good at it and meet lots of problems, whatsoever, I will keep learning. i am wondering if anyone can tell me whether there is some wall functons can offer 0 shear stress along the wall.
I am trying to simulate axis revolution body moving in water,


as you can see in my picture, turblent wall function,whick is not supposed, is applied on the cylinder bound( I name it HULL), currently I define it as below

HULL
nuTilda type zeroGradient;
P type zeroGradient;
nut type slip;
value uniform 0;
U type slip;
k type slip;
epsilon type slip.
RAS model k-epsilon pisoFoam/simpleFoam are adopted...
2012-12-05 19_16_46?????.jpg
any advice is appresiated.
burt is offline   Reply With Quote

Old   December 5, 2012, 13:43
Default
  #2
Senior Member
 
Matthew Denno
Join Date: Feb 2010
Posts: 138
Rep Power: 16
mgdenno is on a distinguished road
I am not sure that I fully understand what you are trying to accomplish, but I think that maybe the problem you are having is just a visualization problem caused by the interpolation of the data in paraFoam. I am not in front of my CFD machine at the moment but in paraFoam where you choose the variable to visualize there are two choices for each variable one is interpolated and the other isn't. I would try the non-interpolated one and see if it looks like you would expect.
mgdenno is offline   Reply With Quote

Old   December 7, 2012, 02:27
Default
  #3
New Member
 
Join Date: Dec 2012
Posts: 9
Rep Power: 13
burt is on a distinguished road
thanks mgdenno
and sorry for my poor english

I will take a try
and I think the problem can be solved in your way...

thanks again...
burt is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Enhanced Wall Treatment paduchev FLUENT 24 January 8, 2018 12:55
channelFoam for a 3D pipe AlmostSurelyRob OpenFOAM 3 June 24, 2011 14:06
Problem with compile the setParabolicInlet ivanyao OpenFOAM Running, Solving & CFD 6 September 5, 2008 21:50
Wall function problem in Fluent mefpz FLUENT 1 October 10, 2007 14:43
Droplet Evaporation Christian Main CFD Forum 2 February 27, 2007 07:27


All times are GMT -4. The time now is 15:47.