CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > OpenFOAM

mesh generation and case run in parallel with different solver

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 7, 2012, 02:21
Default mesh generation and case run in parallel with different solver
New Member
Join Date: Dec 2012
Posts: 9
Rep Power: 7
burt is on a distinguished road
My case can be separated into two parts,A and B. an interface is supposed to be arranged between them. Will professional guys teach me how to set mesh A calculated in processor 0 and mesh B in processor 1. data exchange through interface? whether it is possible that part A be calculated by potentialFoam and part B by ras model. If not, can I solve it with different k and epsilon value in two parts when adopting k-epsilon model?

Any advise is appreciated, and any words from you is kind of encouragement for me!
burt is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Is Playstation 3 cluster suitable for CFD work hsieh OpenFOAM 9 August 16, 2015 14:53
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
ATTENTION! Reliability problems in CFX 5.7 Joseph CFX 14 April 20, 2010 15:45
Mesh Generation and Case Set up Vatant (Vatant) OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 6 March 12, 2009 04:20
SnappyHexMesh not generate mesh first time mavimo OpenFOAM Mesh Utilities 4 August 26, 2008 07:08

All times are GMT -4. The time now is 16:26.