What's and where's engineDyMFoam

tesla · January 18, 2013, 11:52

Hi,
where can I find the engineDyMFoam? I use OpenFoam 2.1.0.
I have to study the working SI. I draw the combustion chamber with catia V5 and I generate an unstructured mesh with pointwise. Now, I use engineFoam. Until 30 CA the simulation works fine. Then the grid, due to the compression, becomes very distorted and the simulation stops.
Can I solve my problem with engineDyMFoam?

Thank you and sorry for my English.

tesla · January 19, 2013, 04:21

Can nobody who help me?

mturcios777 · January 21, 2013, 17:19

There is no engineDyMFoam under 2.1.x versions. You will either have to code your own or use 1.6-ext.

January 18, 2013, 11:52	What's and where's engineDyMFoam	#1
tesla New Member raffaele Join Date: Jun 2012 Posts: 3 Rep Power: 15	Hi, where can I find the engineDyMFoam? I use OpenFoam 2.1.0. I have to study the working SI. I draw the combustion chamber with catia V5 and I generate an unstructured mesh with pointwise. Now, I use engineFoam. Until 30 CA the simulation works fine. Then the grid, due to the compression, becomes very distorted and the simulation stops. Can I solve my problem with engineDyMFoam? Thank you and sorry for my English.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 19, 2013, 04:21		#2
tesla New Member raffaele Join Date: Jun 2012 Posts: 3 Rep Power: 15	Can nobody who help me?

January 21, 2013, 17:19		#3
mturcios777 Senior Member Marco A. Turcios Join Date: Mar 2009 Location: Vancouver, BC, Canada Posts: 740 Rep Power: 29	There is no engineDyMFoam under 2.1.x versions. You will either have to code your own or use 1.6-ext.