CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM

Heat FLux using chtMultiRegionSimpleFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 10, 2013, 11:38
Default Heat FLux using chtMultiRegionSimpleFoam
Gabriel de PInho RImoli
Join Date: Mar 2013
Posts: 49
Rep Power: 6
Grimoli is on a distinguished road
I was making a case that i want to make a flux between a solid and fluid region.Eventhough I did it,the terminal doesn't understand the case and it works as there's nothing between the two areas.What I'am doing wrong??

internalField uniform 300;

type zeroGradient;
value uniform 300;

type compressible::turbulentTemperatureCoupledBaffleMix ed;
neighbourFieldName T;
K solidThermo;
KName none;
value uniform 300;
type solidWallHeatFluxTemperature;
gradient 0 ;
q uniform 7.53;
K K;
value uniform 450;

Grimoli is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wall Heat Flux & Temperature Greg Perkins FLUENT 10 November 20, 2015 10:32
Enforce bounds error with heat loss boundary condition at solid walls Chander CFX 2 May 1, 2012 20:11
Negative Heat Flux shashank312 FLUENT 3 December 9, 2011 18:00
CFX - wall heat flux divarano CFX 2 December 4, 2006 17:14
Total heat transf. rate vs Total surface heat flux Renato Sousa FLUENT 0 August 22, 2005 10:34

All times are GMT -4. The time now is 07:46.