|June 28, 2013, 04:32||
Problem with the turbineSiting tutorial and snappyHexMesh
Join Date: Jun 2013
Posts: 1Rep Power: 0
I'm a student and a new user of OpenFoam. I am currently trying to adapt the turbineSiting tutorial from OpenFoam 2.2.0 to my own terrain for a study.
I think to have properly adapted the blockMeshDict file for my simulation and the snappyHexMeshDict file too. The problem is when I launch the Allrun file from my terminal I receive this message :
Running snappyHexMesh in parallel on /home/neapoli/OpenFOAM/neapoli-2.2.0/run/tutorials/incompressible/simpleFoam/Desaru using 4 processes
cp: target `./processor0/0/' is not a directory
cp: target `./processor1/0/' is not a directory
cp: target `./processor2/0/' is not a directory
cp: target `./processor3/0/' is not a directory
I observed from the turbineSiting tutorial that those missing files should be created after launching the Allrun script but it doesn't seems to work with my project. For this study I just created a copy of the turbineSiting folder in the simpleFoam folder so I assume that it should work correctly.
So if anybody have clue about what is going on with my project I'll be glad to hear it. Thank you in advance!
PS: this is my first time asking a question on this kind of forum, so if I have forgot something do not hesitate to tell me what.
|Thread||Thread Starter||Forum||Replies||Last Post|
|New! Turbinesiting tutorial||bathgooner||OpenFOAM Pre-Processing||5||November 4, 2015 03:17|
|snappyHexMesh - 2D Cylinder Problems||Logan Page||OpenFOAM Native Meshers: snappyHexMesh and Others||4||May 27, 2013 12:07|
|Using turbineSiting Tutorial for a 2D model||bathgooner||OpenFOAM Running, Solving & CFD||0||March 14, 2012 14:35|
|snappyHexMesh stl file read problem||joeholdsworth||OpenFOAM Native Meshers: snappyHexMesh and Others||4||June 25, 2011 03:29|
|snappyhexmesh problem||owayz||OpenFOAM||6||February 2, 2011 13:16|