Solvers for simulation of different species without combustion

payal05 · August 27, 2013, 10:19

helo
can anyone suggest model for simulation of diffrent species without combustion ?

wyldckat · August 27, 2013, 18:01

Greetings Payal,

Have you check this list

: http://www.openfoam.org/docs/user/standard-solvers.php

If the previous link doesn't help, please provide more information about the type of simulation you want to do.

Best regards,
Bruno

payal05 · August 28, 2013, 15:22

helo bruno ,
actually i want to simulate the flow in my case having 2 inlets . one for air and other for fuel . so i need a solver which will handle different species without combustion .

so can you plz suggest solver for my case .

thanks
regards ,
payal

wyldckat · August 28, 2013, 15:33

Hi Payal,

I used Google to search for:

Code:

openfoam multispecies flow

I found this thread: http://www.cfd-online.com/Forums/ope...-gas-flow.html

And also found that you can use the reactingFoam and rhoReactingFoam solvers, as long as you turn off the chemistry and/or combustion part.

Best regards,
Bruno

payal05 · August 28, 2013, 15:40

thanks bruno for guiding me . i wl start working with these solver .

payal05 · September 9, 2013, 05:27

greetings Bruno ,

Is there any documentation on this reactingFoam solver ? bcz without it , its difficult for me to understand and proceed further .
so can you suggest something for the above said .

thanks ,
Regards ,
payal.

wyldckat · September 9, 2013, 14:02

Hi Payal,

I did a quick search with Google and these are the first 3 hits:

Best regards,
Bruno

payal05 · September 11, 2013, 10:52

thanks Bruno . its really useful .

cfdonline2mohsen · September 13, 2013, 04:29

Dear payal
I just want to add that if your fluids are incompressible (Mach number below 0.3) you can use incompressible solvers that exist in multiphase solvers like twoliquidmixingfoam.

payal05 · September 14, 2013, 09:20

greetings Mohsen,

yes my flow is incompressible but after the simulation with different species without combustion. i want to do it with combustion . i started with reactingFoam fist with combustion off and then on but you can guide me if there are other solvers which i can use for my case .

thanks ,
Regards ,
Payal

cfdonline2mohsen · September 14, 2013, 16:24

If you want to simulate it with combustion later; then you must use the combustion solvers

Good Luck

August 27, 2013, 10:19	Solvers for simulation of different species without combustion	#1
payal05 New Member payal Join Date: Aug 2013 Location: banglore Posts: 14 Rep Power: 12	helo can anyone suggest model for simulation of diffrent species without combustion ?

August 27, 2013, 18:01		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Payal, Have you check this list : http://www.openfoam.org/docs/user/standard-solvers.php If the previous link doesn't help, please provide more information about the type of simulation you want to do. Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

August 28, 2013, 15:33		#4
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Hi Payal, I used Google to search for: Code: openfoam multispecies flow I found this thread: http://www.cfd-online.com/Forums/ope...-gas-flow.html And also found that you can use the reactingFoam and rhoReactingFoam solvers, as long as you turn off the chemistry and/or combustion part. Best regards, Bruno payal05 likes this. __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

September 9, 2013, 14:02		#7
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Hi Payal, I did a quick search with Google and these are the first 3 hits: http://www.tfd.chalmers.se/~hani/kur...actingFoam.pdf http://openfoamwiki.net/index.php/Tu..._firstTutorial http://openfoamwiki.net/index.php/Op...h_reactingFOAM Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

September 13, 2013, 04:29		#9
cfdonline2mohsen Senior Member Mohsen KiaMansouri Join Date: Jan 2010 Location: CFD Lab Posts: 118 Rep Power: 16	Dear payal I just want to add that if your fluids are incompressible (Mach number below 0.3) you can use incompressible solvers that exist in multiphase solvers like twoliquidmixingfoam. payal05 likes this. __________________ “If you have an apple and I have an apple and we exchange these apples then you and I will still each have one apple. But if you have an idea and I have an idea and we exchange these ideas, then each of us will have two ideas.”

August 28, 2013, 15:22		#3
payal05 New Member payal Join Date: Aug 2013 Location: banglore Posts: 14 Rep Power: 12	helo bruno , actually i want to simulate the flow in my case having 2 inlets . one for air and other for fuel . so i need a solver which will handle different species without combustion . so can you plz suggest solver for my case . thanks regards , payal

August 28, 2013, 15:40		#5
payal05 New Member payal Join Date: Aug 2013 Location: banglore Posts: 14 Rep Power: 12	thanks bruno for guiding me . i wl start working with these solver .

September 9, 2013, 05:27		#6
payal05 New Member payal Join Date: Aug 2013 Location: banglore Posts: 14 Rep Power: 12	greetings Bruno , Is there any documentation on this reactingFoam solver ? bcz without it , its difficult for me to understand and proceed further . so can you suggest something for the above said . thanks , Regards , payal.

September 11, 2013, 10:52		#8
payal05 New Member payal Join Date: Aug 2013 Location: banglore Posts: 14 Rep Power: 12	thanks Bruno . its really useful .

September 14, 2013, 09:20		#10
payal05 New Member payal Join Date: Aug 2013 Location: banglore Posts: 14 Rep Power: 12	greetings Mohsen, yes my flow is incompressible but after the simulation with different species without combustion. i want to do it with combustion . i started with reactingFoam fist with combustion off and then on but you can guide me if there are other solvers which i can use for my case . thanks , Regards , Payal

September 14, 2013, 16:24		#11
cfdonline2mohsen Senior Member Mohsen KiaMansouri Join Date: Jan 2010 Location: CFD Lab Posts: 118 Rep Power: 16	If you want to simulate it with combustion later; then you must use the combustion solvers Good Luck __________________ “If you have an apple and I have an apple and we exchange these apples then you and I will still each have one apple. But if you have an idea and I have an idea and we exchange these ideas, then each of us will have two ideas.”

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modelling Biomass Combustion via Species Transport	Racheal	FLUENT	39	January 8, 2022 07:42
Combustion Chamber Species Transport	Catthan	FLUENT	2	April 27, 2021 03:39
Species Transport and other combustion models in fluent	dsn2491	FLUENT	7	January 21, 2020 16:56
Species computation in premixed combustion	zcarral	FLUENT	0	July 25, 2013 02:46
Coal combustion - volatile species	Venky	FLUENT	4	October 22, 2008 19:28