masterthesis Water/Air spray

tharkus · March 26, 2014, 07:13

Hello everyone,

I am new in this forum so let me introduce myself very briefly:

My name is Markus and I am a student in Applied Computional Mechanics.
I am almost finished my studies and now I am looking for a master thesis topic.

Therefore I want to simulate the spray of water atomized with air injectors with OpenFoam. In this case there is one water injector in the middle and four surrounding air injector to atomize the water into spray.

I didn´t applied the master thesis since now and want to know if this problem can be solved with OpenFoam in general and your opinion if this is treatable in half a year with only small experiance with OpenFoam. I did some further CFD simulation with NX Flow and Star ccm+ and theory during study, so there is some knowledge about CFD and sprays in general.

For validation I will do some experiments with a partner company, to get sizes of droplets, velocities and geometrical shape of the spray.

Thanks for your help.

Greets
Markus

piccinini · March 26, 2014, 11:41

Hello, Tharkus.

It is very difficult to model the primary atomization, i.e., the initial breakup of the liquid core into small droplets.

If you measure the outlet conditions in the injector nozzle (droplet diameter, velocity, temperature, etc), you may try OpenFOAM to model the spray evolution from this point on.

mturcios777 · March 26, 2014, 15:37

Seems like one of the multiphase solvers could do the job. Have a look the multiphase tutorials cases to look at what is capable.

tharkus · March 27, 2014, 04:40

thx for the first answers.

I heard about that there are different models for first atomization implemented in sprayfoam. I try a closer look at that or maybe change my topic as you said piccinini.

Does anybody has experiance in first atomization modelling of plain jet airblast nozzles?
In fact atomization of plain jet airblast nozzles mainly happens through capillary action ( Rayleigh mode)

amkokko · April 16, 2014, 01:38

Hi,

maybe this is a late reply, but these seem to be interesting: http://computing.ornl.gov/SC10/docum..._Anne_Dord.pdf, http://www.openfoamworkshop.org/6th_...ord_slides.pdf.

Best Regards, Antti

March 26, 2014, 07:13	masterthesis Water/Air spray	#1
tharkus New Member Join Date: Mar 2014 Posts: 2 Rep Power: 0	Hello everyone, I am new in this forum so let me introduce myself very briefly: My name is Markus and I am a student in Applied Computional Mechanics. I am almost finished my studies and now I am looking for a master thesis topic. Therefore I want to simulate the spray of water atomized with air injectors with OpenFoam. In this case there is one water injector in the middle and four surrounding air injector to atomize the water into spray. I didn´t applied the master thesis since now and want to know if this problem can be solved with OpenFoam in general and your opinion if this is treatable in half a year with only small experiance with OpenFoam. I did some further CFD simulation with NX Flow and Star ccm+ and theory during study, so there is some knowledge about CFD and sprays in general. For validation I will do some experiments with a partner company, to get sizes of droplets, velocities and geometrical shape of the spray. Thanks for your help. Greets Markus

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spray total droplet momentum calculation help	tarnsharma	AVL FIRE	0	July 19, 2012 08:17
[ANSYS Meshing] Meshing for study on fuel spray	carolann	ANSYS Meshing & Geometry	0	June 25, 2012 02:59
Spray slows then stops	coastal593	OpenFOAM Running, Solving & CFD	6	July 31, 2007 16:14
spray injection	mmacrb	FLUENT	0	January 10, 2007 04:57
problems with unsteady spray simulation	Mathias	FLUENT	1	July 20, 2006 16:13

March 26, 2014, 11:41		#2
piccinini New Member Join Date: Mar 2009 Location: Sao Jose dos Campos, Brazil Posts: 29 Rep Power: 17	Hello, Tharkus. It is very difficult to model the primary atomization, i.e., the initial breakup of the liquid core into small droplets. If you measure the outlet conditions in the injector nozzle (droplet diameter, velocity, temperature, etc), you may try OpenFOAM to model the spray evolution from this point on.

March 26, 2014, 15:37		#3
mturcios777 Senior Member Marco A. Turcios Join Date: Mar 2009 Location: Vancouver, BC, Canada Posts: 740 Rep Power: 28	Seems like one of the multiphase solvers could do the job. Have a look the multiphase tutorials cases to look at what is capable.

March 27, 2014, 04:40		#4
tharkus New Member Join Date: Mar 2014 Posts: 2 Rep Power: 0	thx for the first answers. I heard about that there are different models for first atomization implemented in sprayfoam. I try a closer look at that or maybe change my topic as you said piccinini. Does anybody has experiance in first atomization modelling of plain jet airblast nozzles? In fact atomization of plain jet airblast nozzles mainly happens through capillary action ( Rayleigh mode)

April 16, 2014, 01:38		#5
amkokko New Member Antti Kokko Join Date: Feb 2012 Posts: 1 Rep Power: 0	Hi, maybe this is a late reply, but these seem to be interesting: http://computing.ornl.gov/SC10/docum..._Anne_Dord.pdf, http://www.openfoamworkshop.org/6th_...ord_slides.pdf. Best Regards, Antti