|
[Sponsors] |
Multiphase Multicomponent CFD model with surface tension |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 23, 2014, 17:00 |
Multiphase Multicomponent CFD model with surface tension
|
#1 |
New Member
j0k3rz j0k3rz
Join Date: Dec 2014
Posts: 1
Rep Power: 0 |
Hi there,
I would like to simulate a problem that involves 2 phases with 2 components in each phase, together with a surface tension force between the phases. For example when supercritical carbon dioxide comes into contact with oil, you have mass transfer from the CO2 dissolution. At the same time because the CO2 is not fully miscible, surface tension still exists. So you have: a) in CO2 phase - CO2 component and vaporised oil component b) in oil phase - liquid oil component and dissolved CO2 I was wondering whether OpenFOAM has any solvers that might be able to solve this problem? Thanks! j0k3rz |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
urgent... multiphase cfd model of packed bed reactor.( VOF MODEL using) | balu@gold6 | FLUENT | 4 | July 26, 2012 10:37 |
[DesignModeler] CFD on Car surface model | KES | ANSYS Meshing & Geometry | 2 | May 15, 2012 16:58 |
multiphase cfd model problems | zhijing peng | FLUENT | 0 | January 7, 2009 13:07 |
Boundary condition of free surface model | Tony | FLUENT | 3 | September 27, 2004 13:48 |
Turbulence model in flow driven by surface tension | Z. ZENG | Main CFD Forum | 7 | April 28, 1999 07:18 |