CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM

3d simulation of bubblefoam case with twophaseeulerfoam solver

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 10, 2015, 13:18
Default 3d simulation of bubblefoam case with twophaseeulerfoam solver
New Member
Join Date: Oct 2014
Posts: 11
Rep Power: 5
Hamzeh_Mirab is on a distinguished road

I generated my own mesh in bubblefoam case with twophaseeulerfoam solver and I wanna simulate 3 dimentional air injection in water. Main question are
1- how can I define open boundary (top)
2- How can I set proper time step
3- my results are 2d but my case specification is 3d. whats the problem?
4- whats the error with thermo.h in these cases
5- whats the reason for high courant number in this case

my case is in attachment

Thanks in advance
Attached Files
File Type: gz mycase.tar.gz (4.8 KB, 7 views)
Hamzeh_Mirab is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Searching solver for welding simulation Kenna OpenFOAM Running, Solving & CFD 6 December 3, 2013 12:03
setting up a bubbleFoam case matt.mech.eng OpenFOAM Running, Solving & CFD 0 April 6, 2012 22:20
Logging files (.C and .H) the solver uses during the solution of a case Bufacchi OpenFOAM 2 February 1, 2012 09:07
How to read or write case by commands during simulation with Fluent lzgwhy FLUENT 4 April 20, 2011 22:02
High density flow - twoPhaseEulerFoam solver raagh77 OpenFOAM Running, Solving & CFD 0 May 29, 2009 04:49

All times are GMT -4. The time now is 01:03.