|
[Sponsors] |
June 11, 2015, 12:34 |
Getting started with OpenFOAM
|
#1 |
Member
Mike
Join Date: Apr 2011
Location: Canada
Posts: 83
Rep Power: 15 |
Hi,
I have been doing CFD with our MPI-FORTRAN in-house code for a couple of years. Now, I am in a new position and I am asked to work with Open FOAM as it is an open-source package. So, I wanted to see if you know a good tutorial for it. I want to run it on Linux systems so I need to get familiar with Linux version. I appreciate your guidance. |
|
June 11, 2015, 12:56 |
|
#2 |
Member
Join Date: Jul 2013
Posts: 55
Rep Power: 12 |
I am not a professional user of OpenFOAM, since I've only use it a few times, mostly to see how it works.
I believe this documentation might be useful. http://cfd.direct/openfoam/documentation/ There are tutorials in the OpenFOAM user's guide. And most of useful Linux commands can be found In the OpenFOAM linux guide. |
|
June 11, 2015, 13:38 |
|
#3 |
Senior Member
Daniel P. Combest
Join Date: Mar 2009
Location: St. Louis, USA
Posts: 621
Rep Power: 0 |
I agree with Alex in that the first place to start is reading the documentation (see the doc folder that comes with the actual OpenFOAM installation if you like PDFs). Depending on your time frame to learn how to use the code, you may want to leverage one of the GUIs that drive OpenFOAM and/or also attend the OpenFOAM workshop. If you attend the workshop (happening in two weeks), there is training on numerous introductory and advanced topics and you can ask questions to people that have been using it for years.
|
|
June 11, 2015, 13:57 |
|
#4 |
Member
Mike
Join Date: Apr 2011
Location: Canada
Posts: 83
Rep Power: 15 |
Thank you for your guidance.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Map of the OpenFOAM Forum - Understanding where to post your questions! | wyldckat | OpenFOAM | 10 | September 2, 2021 05:29 |
Memory protection in OpenFOAM / combinig with FORTRAN | botp | OpenFOAM Programming & Development | 2 | February 15, 2016 12:25 |
OpenFOAM Training Pilot Sessions June 2015 | cfd.direct | OpenFOAM Announcements from Other Sources | 0 | April 8, 2015 17:26 |
Differences between CFX and OpenFOAM regarding convergence and robustness! | magjohan | OpenFOAM Running, Solving & CFD | 4 | February 26, 2015 10:26 |
Summer School on Numerical Modelling and OpenFOAM | hjasak | OpenFOAM | 5 | October 12, 2008 13:14 |