Error using DPMFoam
Hey Foamers,
I am currently working on particle tracking using OpenFOAM and trying to compute my domain with DPMFoam. I am facing a ''couple'' of problems and would need some help. The error message I am getting is the following: Code:
--> FOAM FATAL ERROR: Code:
/*--------------------------------*- C++ -*----------------------------------*\ Code:
/*--------------------------------*- C++ -*----------------------------------*\ Code:
/*--------------------------------*- C++ -*----------------------------------*\ I would be extremely grateful if someone could help me and maybe report any previous similar errors with the same solver. Thanks :) Raed |
Hi Raed,
I am facing a similar issue. Were you able to figure out the solution for this? My p_rgh and U.air are below. p_rgh: Code:
dimensions [1 -1 -2 0 0 0 0]; U.air: Code:
dimensions [0 1 -1 0 0 0 0]; |
Hi,
Using DPMFoam to study the scour around a cylinder, I started with a classic model without particles in icoFoam. Everything is ok concerning the mesh, fluid behavior... Then, in DPMFoam, with 1 particle and the same mesh, boundary conditions..., when I set g = 0, the simulation converges well and the results match those of icoFoam. But when g = -9.81, U_z, U_magnitude,Courant Number increase at the outlet and the simulation stops. Did you solve the problem ? |
DPM Foam Problem
I’m trying to simulate a axyssimetric nozzle using wdge and extrudeMesh. The simulation is a multiphasic argon/metal particle. I used a dambreak case with particles as base. I’m getting this error:
"PIMPLE: iteration 1 DILUPBiCG: Solving for U.airx, Initial residual = 1, Final residual = 3.05784e-06, No Iterations 1 DILUPBiCG: Solving for U.airy, Initial residual = 1, Final residual = 1.28577e-06, No Iterations 1 DILUPBiCG: Solving for U.airz, Initial residual = 0.00526608, Final residual = 2.48302e-08, No Iterations 1 --> FOAM FATAL ERROR: (openfoam-2012) request for volVectorField U from objectRegistry region0 failed available objects of type volVectorField are 5(U.air U.air_0_0 U.air_0 HbyA cloudVolSUSu) From const Type& Foam::objectRegistry::lookupObject(const Foam::word&, bool) const [with Type = Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>] in file /home/pawan/OpenFOAM/OpenFOAM/OpenFOAM-v2012/src/OpenFOAM/lnInclude/objectRegistryTemplates.C at line 463. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&)sh: 1: addr2line: not found addr2line failed #1 Foam::error::exitOrAbort(int, bool)sh: 1: addr2line: not found addr2line failed #2 Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> const& Foam::objectRegistry::lookupObject<Foam::Geometric Field<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh> >(Foam::word const&, bool) constsh: 1: addr2line: not found addr2line failed #3 Foam::totalPressureFvPatchScalarField::updateCoeff s()sh: 1: addr2line: not found addr2line failed #4 Foam::fvMatrix<double>::fvMatrix(Foam::GeometricFi eld<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::dimensionSet const&)sh: 1: addr2line: not found addr2line failed #5 Foam::fv::gaussLaplacianScheme<double, Foam::SymmTensor<double> >::fvmLaplacianUncorrected(Foam::GeometricField<do uble, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&)sh: 1: addr2line: not found addr2line failed #6 Foam::fv::gaussLaplacianScheme<double, double>::fvmLaplacian(Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&)sh: 1: addr2line: not found addr2line failed #7 Foam::tmp<Foam::fvMatrix<double> > Foam::fvm::laplacian<double, double>(Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh> const&, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&)sh: 1: addr2line: not found addr2line failed #8 ?sh: 1: addr2line: not found addr2line failed #9 __libc_start_mainsh: 1: addr2line: not found addr2line failed #10 ?sh: 1: addr2line: not found"[/I][/I] Thank you in advance, Leon |
All times are GMT -4. The time now is 05:54. |