CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM

triple contact line and angle contact

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 10, 2017, 04:18
Default triple contact line and angle contact
  #1
Member
 
lynda
Join Date: Oct 2009
Posts: 51
Rep Power: 9
lyna is on a distinguished road
Hi

I work on a two phase flow in a channel (2D axisymertrique), The gas is injected through a nozzle which has a thickness (internal Ryon = 0.1 mm and external Ryon = 0.2 mm), using interFoam
The triple contact line moves over time. It moves between the inner diameter and the outer diameter of the nozzle. I want to know if this is a miscalculation, or I have to fix the triple line or contact angle at the nozzle, and how do I do this?

thank you
lyna is offline   Reply With Quote

Old   March 14, 2017, 13:02
Default
  #2
Senior Member
 
Saideep
Join Date: Apr 2015
Location: INDIA
Posts: 165
Rep Power: 3
Saideep is on a distinguished road
Hi Lynda;

I have a few question.

1. What is "Ryon"? (I never worked on nozzle flows so, I am not sure if this word is specific to that field).

2. I am not clear about where the meniscus is in motion. Could you post a picture showing what is happening?

Saideep
Saideep is offline   Reply With Quote

Old   March 14, 2017, 15:05
Default
  #3
Member
 
piu58's Avatar
 
Uwe Pilz
Join Date: Feb 2017
Location: Leipzig, Germany
Posts: 78
Rep Power: 2
piu58 is on a distinguished road
Dear Iynda,

I think it would be better to describe closer what you are trying to simulate. A sketch of the geometry would be fine, and a graph of the results in question too.
__________________
Uwe Pilz
--
Sie ahnen nicht, wieviel Poesie in der Berechnung
einer Logarithmentafel enthalten ist (Carl Friedrich Gauß)
piu58 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic contact angle rmousavibt Fluent UDF and Scheme Programming 11 January 6, 2017 16:45
dynamic contact angle / contact line velocity ThomasN CFX 6 September 23, 2014 06:07
help with UDF for contact angle based on contact line velocity gandesk Fluent UDF and Scheme Programming 14 October 29, 2012 14:58
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
Moving contact line (dynamic contact angle) Pulli FLUENT 0 March 1, 2007 13:31


All times are GMT -4. The time now is 23:31.