|
[Sponsors] |
August 10, 2018, 09:36 |
Sprayfoam wedge, and lagrangian Data
|
#1 |
New Member
Jan
Join Date: Jul 2018
Posts: 9
Rep Power: 7 |
Hello guys, and thanks already for the upcoming help.
I'm solving a sprayjet with a fuel injection, as a 4 degree wedge. First of all i ask myself whether i need to change the injected mass to 1/90 of the real value cause its only a 4 degree wedge, or whether openFoam is doing that himself? There was a Thread about this here in the forum, someone said, that in older Versions Openfoam did that on it's own. Further on i need to read out the lagrangian Data, what I'm right now doing by loading my case into ParaView, going to the time-step and saving it as a .csv, which i can open in LibreOffice. First of all if i want to count how many particles I've got at a given Diameter. So i can sort the column of the diameter and count the Parcels, but than to get all der Particles i need to sum up the nParticles of each Parcel, is that right? And my biggest Problem right now is, that i need also the information about the Positions of the Parcel, so that I can evaluate a distribution of the droplets at a certain level. I can't find the information in the csv, which I also attached(i zipped it, caus a csv is not allowed as upload). There is only the "position0:0...0:2" which is the information where the parcel got eddited. Thank you for the upcoming help, greetings jan |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lagrangian Particle Hitting Wedge BC | ahcai007 | OpenFOAM Running, Solving & CFD | 0 | March 21, 2014 13:22 |