need an interphase mass transfer model for single component

highend · January 8, 2019, 10:49

Hi

I am new to Openfoam and I would like to use an interphase mass transfer model with interface tracking VOF or level set. I have searched openfoam user guide but could not find any help. I found a solver for a group that developed an interThermalPhaseChangeFoam but it is not compatible with openfoam 5

If you have any information I would be grateful

Cyp · January 9, 2019, 07:55

Hi,

You probably want to implement the CST method on top of interFoam. Please, have a look at these papers (and the references therein):

https://www.sciencedirect.com/science/article/pii/S0009250918303944

https://link.springer.com/article/10.1007%2Fs11242-017-0921-1

Cheers,
Cyprien

highend · January 15, 2019, 10:21

thank you for your reply. I think that it will be difficult to implant since I am new to openfoam

January 8, 2019, 10:49	need an interphase mass transfer model for single component	#1
highend New Member saad Join Date: Jan 2019 Posts: 7 Rep Power: 8	Hi I am new to Openfoam and I would like to use an interphase mass transfer model with interface tracking VOF or level set. I have searched openfoam user guide but could not find any help. I found a solver for a group that developed an interThermalPhaseChangeFoam but it is not compatible with openfoam 5 If you have any information I would be grateful

January 9, 2019, 07:55		#2
Cyp Senior Member Cyprien Join Date: Feb 2010 Location: Stanford University Posts: 299 Rep Power: 19	Hi, You probably want to implement the CST method on top of interFoam. Please, have a look at these papers (and the references therein): https://www.sciencedirect.com/science/article/pii/S0009250918303944 https://link.springer.com/article/10.1007%2Fs11242-017-0921-1 Cheers, Cyprien __________________ www.cypriensoulaine.com/openfoam

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about adaptive timestepping	Guille1811	CFX	25	November 12, 2017 18:38
Interphase mass transfer of a reaction	cfx_ws1992	Main CFD Forum	0	May 15, 2017 22:42
Wrong multiphase flow at rotating interface	Sanyo	CFX	14	February 7, 2017 18:19
Multiphase flow - incorrect velocity on inlet	Mike_Tom	CFX	6	September 29, 2016 02:27
An error has occurred in cfx5solve:	volo87	CFX	5	June 14, 2013 18:44

January 15, 2019, 10:21		#3
highend New Member saad Join Date: Jan 2019 Posts: 7 Rep Power: 8	thank you for your reply. I think that it will be difficult to implant since I am new to openfoam