CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

How to set 2D airfoil simulation using k kl omega turbulence modele?!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 21, 2019, 04:06
Default How to set 2D airfoil simulation using k kl omega turbulence modele?!!
  #1
Member
 
Os
Join Date: Jun 2017
Posts: 80
Rep Power: 8
losiola is on a distinguished road
Hi guys ,
I am new to openFoam and i want to make a 2D airfoil simulation with the k kl omega turbulence modele . How can i set the boundary conditions for my simulation and what are the files that i need for it (kl kt omega p u ...)?
losiola is offline   Reply With Quote

Old   January 25, 2019, 11:41
Default
  #2
Member
 
Os
Join Date: Jun 2017
Posts: 80
Rep Power: 8
losiola is on a distinguished road
No Answers !! Come on guys i really need your help .. ive been looking around i ve found a tutorial in openfoam that uses k-Kl omega turbulence model named ellipssekklomega May i use the same boundary like the tutorial? and how about the symmetry boundary for top and bottom will i still be able to use it with my 2D airfoil Simulation ?!


Thank you
losiola is offline   Reply With Quote

Old   January 31, 2019, 02:31
Default
  #3
Senior Member
 
Zander Meiring
Join Date: Jul 2018
Posts: 125
Rep Power: 7
yambanshee is on a distinguished road
You're giving way too little information to really be helped. How does your domain look? what boundaries do you have? etc... It's more helpful to ask specific questions rather than such a vague general question with no prior insight of your own
yambanshee is offline   Reply With Quote

Old   February 3, 2019, 16:14
Default
  #4
Member
 
Os
Join Date: Jun 2017
Posts: 80
Rep Power: 8
losiola is on a distinguished road
Quote:
Originally Posted by yambanshee View Post
You're giving way too little information to really be helped. How does your domain look? what boundaries do you have? etc... It's more helpful to ask specific questions rather than such a vague general question with no prior insight of your own


Thank you for the Replay Yambanshee , Now i ve fixed the problem of divergence of my simulation but i still have a question for the Y+ value for the Kkl Omega turbulence model .


How much should be the value for the Y+ since am using the nutLowReWallFunction ?
losiola is offline   Reply With Quote

Old   February 4, 2019, 06:41
Default
  #5
Senior Member
 
Zander Meiring
Join Date: Jul 2018
Posts: 125
Rep Power: 7
yambanshee is on a distinguished road
Quote:
Originally Posted by losiola View Post
Thank you for the Replay Yambanshee , Now i ve fixed the problem of divergence of my simulation but i still have a question for the Y+ value for the Kkl Omega turbulence model .


How much should be the value for the Y+ since am using the nutLowReWallFunction ?

Typically a y+ in the region of < 1 is prefered
yambanshee is offline   Reply With Quote

Old   February 24, 2019, 06:13
Default
  #6
Member
 
Os
Join Date: Jun 2017
Posts: 80
Rep Power: 8
losiola is on a distinguished road
Quote:
Originally Posted by yambanshee View Post
Typically a y+ in the region of < 1 is prefered
Hello Again Thank you for your help ,
and i still have some issues with my simulation Hope you can help me with it,
I run my 2D airfoil simulation and it's converging and giving me results for Cm Cl Cd but the results i got are bit too High for the Cd and Cl compared to the experimental Data.

th got a Cl=0.3518 while in experience is Cl=0.2954
and for drag i got Cd=0.0142 while in experience it is Cd =0.00883


In order to resolve the problem I ve tried to refine the mesh (mesh independance) and yet there still the Same Problem.

Is it possible that there is a Problem with my boundary conditions or my Initial Values?

I ll send you my boundary conditions files via email if it's okk with you!
losiola is offline   Reply With Quote

Old   July 31, 2019, 03:43
Default
  #7
Member
 
beyonder
Join Date: May 2015
Posts: 67
Rep Power: 10
beyonder1 is on a distinguished road
Quote:
Originally Posted by losiola View Post
Thank you for the Replay Yambanshee , Now i ve fixed the problem of divergence of my simulation but i still have a question for the Y+ value for the Kkl Omega turbulence model .


How much should be the value for the Y+ since am using the nutLowReWallFunction ?
Hi Os,
I am also facing the Omega divergence issue. Could you let me know how you fixed the divergence? Also, how are you setting the initial conditions?

Thanks
beyonder1 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with airfoil shape optimization robyTKD SU2 Shape Design 7 March 7, 2022 17:18
Airfoil lift and drag using k-kl-omega turbulence model hylleman OpenFOAM Running, Solving & CFD 6 June 17, 2016 16:10
Simulation of 0021 airfoil at 120,000 Reynolds number AUCH FLUENT 0 September 25, 2013 00:05
NACA 2412 airfoil simulation using Turbulence Models mahbub03 Main CFD Forum 0 February 1, 2011 13:48
Env variable not set gruber2 OpenFOAM Installation 5 December 30, 2005 05:27


All times are GMT -4. The time now is 12:39.