|
[Sponsors] |
Courant number jumps and stays at 1 during pisofoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 15, 2022, 12:47 |
Courant number jumps and stays at 1 during pisofoam
|
#1 |
New Member
david simm
Join Date: Oct 2022
Posts: 2
Rep Power: 0 |
I am going through the user guide https://doc.cfd.direct/openfoam/user-guide-v10/cavity, an i am on the section on the lid driven cavity for having high reynolds number, i have followed the guide (i didnt change any settings since it was all preset, only thing i did was change the file name 0.orig to 0) and when i start the pisofoam, the courant number changes from 0.26something at 2.5secs to 1 at 2.505 secs where it stayed at 1 the entire time. when i tried to change the timestep from 0.005 to 0.004 all it did was instead of it staying at 1, it stayed at 0.8.
https://file.io/M5t6d1PrZj2O link to the log file for when courant number stays at 1. mesh size is (20,20,1), maximum velocity is 1m/s, distance is 0.1m, the timestep of 0.005 secs should work. |
|
|
|