CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

OpenFoam paraView snappyhexmesh generation problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 3, 2019, 09:22
Default OpenFoam paraView snappyhexmesh generation problem
  #1
New Member
 
anonymous
Join Date: Sep 2019
Location: North Carolina
Posts: 25
Rep Power: 6
tenichols19 is on a distinguished road
Hi everyone,

I am currently new to openFoam and I'm in need of running simulations for my job. Due to the PC I was given at work I had to download openFoam on windows 7. It seemed to work okay for some basic tutorials but when I tried to make a more complicated mesh using snappyhexmesh I have ran into problems.

After I make my initial boxmesh I am able to see it generated in paraview, but when I try and upload my stl file in paraview it does appear in my files... I have changed the 'Files of type:' , re-saved it, changed the location, and anything else I can think of but still no luck. So basically paraview is not recognizing stl files. Are there a few important steps to open up a stl in paraview? From what I have seen and read I should be able to open up paraview and at least view the stl.

Come to find out while going through the propeller tutorial, I am able to open .obj files..

I have been following a few tutorials and I get stuck at this same step and need to figure this out before I can move on so any advice would be helpful

Last edited by tenichols19; September 4, 2019 at 08:09.
tenichols19 is offline   Reply With Quote

Old   September 4, 2019, 03:17
Default
  #2
Member
 
Philipp Conen
Join Date: Apr 2019
Location: GER, NRW
Posts: 35
Blog Entries: 2
Rep Power: 6
pconen is on a distinguished road
Hey,

do you really work on Windows? If so, I would recommend that you use a virtual machine and Linux, as unpredictable errors can occur.

To open an STL file you simply have to choose Open. Then go to the constant folder -> triSurface and select the STL from there.

To see your network in sHM you have to open it with
Code:
paraFoam -touchAll
create the necessary files.
I hope I could help you.
__________________
Greetings

Philipp Conen
pconen is offline   Reply With Quote

Old   September 4, 2019, 07:59
Default
  #3
New Member
 
anonymous
Join Date: Sep 2019
Location: North Carolina
Posts: 25
Rep Power: 6
tenichols19 is on a distinguished road
Unfortunately atm I don't have the ability to access a virtual machine...
But still no luck...

Last edited by tenichols19; September 9, 2019 at 10:25.
tenichols19 is offline   Reply With Quote

Reply

Tags
openfoam, paraview, snappyhexmesh, stl file

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM.org] OpenFOAM 2.4 ParaView 4.1 compilation problem tubois OpenFOAM Installation 2 October 23, 2015 07:56
[blockMesh] Problem with mesh generation Silvy OpenFOAM Meshing & Mesh Conversion 12 July 12, 2015 17:10
Suggestion for a new sub-forum at OpenFOAM's Forum wyldckat Site Help, Feedback & Discussions 20 October 28, 2014 10:04
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52
Yet another Paraview problem gascortado OpenFOAM 5 February 21, 2010 07:39


All times are GMT -4. The time now is 17:02.