Block inside-out
 

Hi all,

I am getting the following error while creating a geometry. I followed same block direction everywhere for front and back faces. Still I am getting inside-out problem. Could you please tell me why that block is inside out.

Thanks.


FOAM FATAL IO ERROR:
Block hex (3 4 8 7 21 22 26 25) (231 25 1) simpleGrading (1(1) 1(1) 1(1)) is inside-out


vertices
(
(0 0 -0.05) //1
(9 0 -0.05) //2
(41 0 -0.05) //3
(272 0 -0.05) //4
(0 25 -0.05) //5
(9 25 -0.05) //6
(41 21.64 -0.05) //7
(272 21.64 -0.05) //8
(41 24.5 -0.05) //9
(272 24.5 -0.05) //10
(41 25.5 -0.05) //11
(272 25.5 -0.05) //12
(41 28.36 -0.05) //13
(272 28.36 -0.05) //14
(0 50 -0.05) //15
(9 50 -0.05) //16
(41 50 -0.05) //17
(272 62.11 -0.05) //18
(0 0 -0.05)
(9 0 0.05)
(41 0 0.05)
(272 0 0.05)
(0 25 0.05)
(9 25 0.05)
(41 21.64 0.05)
(272 21.64 0.05)
(41 24.5 0.05)
(272 24.5 0.05)
(41 25.5 0.05)
(272 25.5 0.05)
(41 28.36 0.05)
(272 28.36 0.05)
(0 50 0.05)
(9 50 0.05)
(41 50 0.05)
(272 62.11 0.05)




);

blocks
(
hex (1 2 6 5 19 20 24 23) (9 25 1) simpleGrading (1 1 1)
hex (2 3 7 6 20 21 25 24) (32 25 1) simpleGrading (1 1 1)
hex (3 4 8 7 21 22 26 25) (231 25 1) simpleGrading (1 1 1)
hex (7 8 10 9 25 26 28 27) (231 10 1) simpleGrading (1 1 1)
hex (9 10 12 11 27 28 30 29) (231 10 1) simpleGrading (1 1 1)
hex (11 12 14 13 29 30 32 31) (231 10 1) simpleGrading (1 1 1)
hex (5 6 16 15 23 24 34 33) (9 25 1) simpleGrading (1 1 1)
hex (6 13 17 16 24 31 35 34) (32 25 1) simpleGrading (1 1 1)
hex (13 14 18 17 31 32 36 35) (231 25 1) simpleGrading (1 1 1)


);