Difference in the predicted locations of hydraulic jump (kOmegaSSTDDES vs kOmegaSST) -- CFD Online Discussion Forums

November 20, 2019, 06:26	Difference in the predicted locations of hydraulic jump (kOmegaSSTDDES vs kOmegaSST)	#1
foamF Member Join Date: Aug 2018 Posts: 47 Rep Power: 7	I just did a simulation of hydraulic jump (2D case) to compare two turbulence models: RANS based kOmegaSST and DES based kOmegaSSTDDES. The simulation result is put in: https://youtu.be/52YP5D38pfc Same grids and same boundary conditions in both cases. The 2D case is physically incorrect to simulate turbulence which is 3D in nature, but it still offers some clues on turbulence modelling. The location of the hydraulic jump predicted by the kOmegaSST model is much farther from the inlet than that of kOmegaSSTDDES. Can someone here explain the locations of the hydraulic jump predicted by both turbulence models?

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hydraulic Jump with St Venant Equations	IbizaFR	Main CFD Forum	0	January 28, 2019 13:00
Why RNGkepsilon model gives floating error	shipman	OpenFOAM Running, Solving & CFD	3	September 7, 2013 08:00
difference between kOmegaSST (OF-1.7.x) and kOmegaSST_lowRe (OF-1.6-ext)	florian_krause	OpenFOAM	3	May 16, 2012 09:02
hydraulic jump	thomi tomsen	Main CFD Forum	0	March 22, 2001 07:50
HYDRAULIC JUMP	Valdemir G. Ferreira	Main CFD Forum	3	October 29, 1999 09:35

All times are GMT -4. The time now is 00:26.