CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

Gas phase velocity not affecting surface film

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 13, 2020, 04:16
Default Gas phase velocity not affecting surface film
  #1
New Member
 
Mustafa
Join Date: Jun 2015
Location: Aachen
Posts: 19
Rep Power: 6
stamufa is on a distinguished road
Hello FOAMers,

The case I'm working on is a flow over a flat plate that is inclined with respect to the horizontal. There is an injection of particles midway along the plate. The flow should move the surface film formed towards the back end of the plate. However, the surface film seems to only be acted upon by gravity.

The attached screenshots show the boundary layer over the plate and the subsequent movement of the wall film. The red circle is where the injection happens.

My question is - how does the surface film model account for forces from the gas phase? How many cells from the gas phase mesh are used to compute the force from the velocity of the gas phase?
Attached Images
File Type: png test1.PNG (112.1 KB, 3 views)
File Type: png test2.PNG (76.2 KB, 4 views)
stamufa is offline   Reply With Quote

Reply

Tags
reactingparcelfoam, surface film

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ignition failure with both gas phase and surface mechanism Weiqiang Liu FLUENT 1 May 3, 2019 21:42
Constant velocity of the material Sas CFX 15 July 13, 2010 09:56
Calculate velocity inflow on a 2D surface in 3D quarkz Main CFD Forum 2 May 10, 2009 06:07
Gas velocity Newbie Main CFD Forum 1 April 7, 2003 06:55
Gas pressure question Dan Moskal Main CFD Forum 0 October 24, 2002 23:02


All times are GMT -4. The time now is 08:57.