|
[Sponsors] |
August 27, 2021, 00:07 |
Simulation of Fluidized Bed Dryer
|
#1 |
New Member
Sirsak Banerjee
Join Date: Aug 2021
Posts: 1
Rep Power: 0 |
Hello Foamers!
I am very new to CFD and OpenFoam. For my Project I have to design a fluidised Bed Dryer. I am trying to use the tutorial file of fluidised bed using multiphaseEuler solver. I am facing two Problems. 1. first i am trying to simply heat the solid material. I have air at 323K and solid at 298K. I am not understanding how to change the boundary condition for my case. Do I need to change the heat transfer model also? 2. Second how can i define moisture into that. Any leads would be very helpful. Thanks in advance. |
|
August 20, 2023, 03:56 |
|
#2 |
New Member
Maharghya Dyuti Das
Join Date: May 2023
Posts: 15
Rep Power: 3 |
Hello,
I am also trying the same can you give me some insight how have you done it. |
|
Tags |
drying; porous media, euler euler solid-gas, fluidisebed, multiphase |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Divergence in gas-solid fluidized bed simulation | Lyapunov | Fluent Multiphase | 1 | January 9, 2017 20:43 |
Need guidance and tips about a fluidized bed reactor gasifier simulation | cmigueis | OpenFOAM | 2 | April 22, 2015 08:54 |
Simulation restart with packet sediment bed | dirksen | FLOW-3D | 1 | February 18, 2015 16:18 |
Tutorial on Fluidized Bed has convergence issues | luca.delbene | STAR-CCM+ | 0 | December 2, 2014 06:05 |
Questions about gas-solid fluidized bed simulation | Sinferm | FLUENT | 1 | January 31, 2007 14:54 |