Kepsilon code for flow through pipe

August 9, 2007, 08:17

Hi all,

I am developing a code for capturing blast furnace hysteresis as a part of my masters research work. And as a part of it i need to add a k-epsilon turbulence model into it.

Can someone please send me a simplistic 2-D code for flow through pipe using standard k-e model ? I haven't used OpenFoam. I am done with most of my work. So if someone can send me the code then I can make the necessary changes as per my requirement instead of writing and debugging a new code at my own.

So it will be of great help if someone can give me this code. you can mail me at
rakesh_budhi@rediffmail.com

regards,

rakesh

alberto · August 9, 2007, 08:22

It's already in OpenFOAM.

For a steady solution: simpleFoam.
For an unsteady solution: turbFoam.

Regards,
Alberto

hjasak · August 9, 2007, 08:23

OpenFOAM will do this for out out of box with no changes. Take the simpleFoam tutorial, modify the geometry (sufficient instructions are in the documentation) and just run it.

Enjoy,

Hrv

August 9, 2007, 08:17	Hi all, I am developing a c	#1
rakesh1434 Guest Posts: n/a	Hi all, I am developing a code for capturing blast furnace hysteresis as a part of my masters research work. And as a part of it i need to add a k-epsilon turbulence model into it. Can someone please send me a simplistic 2-D code for flow through pipe using standard k-e model ? I haven't used OpenFoam. I am done with most of my work. So if someone can send me the code then I can make the necessary changes as per my requirement instead of writing and debugging a new code at my own. So it will be of great help if someone can give me this code. you can mail me at rakesh_budhi@rediffmail.com regards, rakesh

August 9, 2007, 08:22	It's already in OpenFOAM. F	#2
alberto Senior Member Alberto Passalacqua Join Date: Mar 2009 Location: Ames, Iowa, United States Posts: 1,912 Rep Power: 36	It's already in OpenFOAM. For a steady solution: simpleFoam. For an unsteady solution: turbFoam. Regards, Alberto __________________ Alberto Passalacqua GeekoCFD - A free distribution based on openSUSE 64 bit with CFD tools, including OpenFOAM. Available as in both physical and virtual formats (current status: http://albertopassalacqua.com/?p=1541) OpenQBMM - An open-source implementation of quadrature-based moment methods. To obtain more accurate answers, please specify the version of OpenFOAM you are using.

August 9, 2007, 08:23	OpenFOAM will do this for out	#3
hjasak Senior Member Hrvoje Jasak Join Date: Mar 2009 Location: London, England Posts: 1,905 Rep Power: 33	OpenFOAM will do this for out out of box with no changes. Take the simpleFoam tutorial, modify the geometry (sufficient instructions are in the documentation) and just run it. Enjoy, Hrv __________________ Hrvoje Jasak Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Understanding k from kepsilon	markh83	OpenFOAM Post-Processing	3	December 5, 2008 03:42
KEpsilon error	mou_mi	OpenFOAM Running, Solving & CFD	3	July 16, 2008 18:25
Is there any 1D solid/gas flow code in pipe?	dongye	Main CFD Forum	0	November 21, 2007 21:05
Kepsilon BC and intialization	podallaire	OpenFOAM Running, Solving & CFD	0	October 17, 2007 20:29
KEpsilon and KOmega	larry	OpenFOAM Running, Solving & CFD	3	June 29, 2006 01:38