Is GUI there for OpenFoam

navaladi · March 28, 2006, 07:58

Does OpenFoam have a GUI for creating my model's and meshing it &for postprocessing?

eugene · March 28, 2006, 08:23

"Does OpenFoam have a GUI for creating my model's"

Yes, FoamX can be used to set up dictionaries, initial fields, etc.

"and meshing it"

No, you have to use 3rd party meshers and convert them to OpenFOAM format.

"for postprocessing"

Yes, its called paraFoam (paraview).

navaladi · March 28, 2006, 08:37

thank u.And OpenFOam will support for Lam/Mpi Cluster But i want to do it in single system..Then why it asking for nsd daemon should be running..

leosding · March 28, 2006, 09:08

You should have more than 2 CPU in your single system to do lam.
step by step as the manual, first boot the lam with command "labroot", then "mpirun" your applications.
Maybe you should read through the manual before you do something.

March 28, 2006, 07:58	Does OpenFoam have a GUI for c	#1
navaladi New Member Navaladi ( navaladi@gmail.com) Join Date: Mar 2009 Location: INDIA Posts: 21 Rep Power: 10	Does OpenFoam have a GUI for creating my model's and meshing it &for postprocessing?

March 28, 2006, 08:23	"Does OpenFoam have a GUI for	#2
eugene Senior Member Eugene de Villiers Join Date: Mar 2009 Posts: 725 Rep Power: 14	"Does OpenFoam have a GUI for creating my model's" Yes, FoamX can be used to set up dictionaries, initial fields, etc. "and meshing it" No, you have to use 3rd party meshers and convert them to OpenFOAM format. "for postprocessing" Yes, its called paraFoam (paraview).

March 28, 2006, 08:37	thank u.And OpenFOam will supp	#3
navaladi New Member Navaladi ( navaladi@gmail.com) Join Date: Mar 2009 Location: INDIA Posts: 21 Rep Power: 10	thank u.And OpenFOam will support for Lam/Mpi Cluster But i want to do it in single system..Then why it asking for nsd daemon should be running..

March 28, 2006, 09:08	You should have more than 2 CP	#4
leosding Member Leosding Join Date: Mar 2009 Posts: 51 Rep Power: 10	You should have more than 2 CPU in your single system to do lam. step by step as the manual, first boot the lam with command "labroot", then "mpirun" your applications. Maybe you should read through the manual before you do something.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFoam vs CFX5 mass balance in OpenFoam	tangd	OpenFOAM Running, Solving & CFD	33	May 23, 2010 16:36
OpenFOAM on mac OSX	Nick Colam	Main CFD Forum	3	January 27, 2009 01:06
CheckMesh error using a tutorial from OpenFOAM 114 with openFOAM 13	martapajon	OpenFOAM Native Meshers: blockMesh	7	January 21, 2008 13:52
OpenFOAM users in Munich OpenFOAM benutzer in M%c3%bcnchen	jaswi	OpenFOAM	0	August 3, 2007 13:11
A new Howto on the OpenFOAM Wiki Compiling OpenFOAM under Unix	mbeaudoin	OpenFOAM Installation	2	April 28, 2006 08:54