SIMDI05 Open Foam Workshop

panara · June 29, 2005, 13:21

Dear all,
I read on CFD-online about the SIMDI OpenFoam Workshop, can somebody give more details about it?
Why it is not advertised on the OpenFoam web pages?
More documentation will be released during the workshop?

Thanks in advance for any extra information,
regards,

Daniele

henry · June 29, 2005, 13:28

We have not included anything on the OpenFOAM or OpenCFD web-sites about this workshop because we have not been told anything about it, not even that it is happening.

June 29, 2005, 14:33

Dr Jasak's message has been removed for legal reasons.

alberto · June 29, 2005, 18:36

I think you can obtain the same information by reading the user guide and doing the tutorials.

It's a 4 hours workshop (definetly too expensive: 500 SEK are about 530 euros): they just don't have the time to teach you something about FOAM programming.
Probably they just will show the structure of equation implementation, comment an existing solver and show beautiful coloured contour plots. ;-)

Just my opinion, however.

Alberto

alberto · June 29, 2005, 18:42

Sorry...it was 5000 SEK

lillberg · September 8, 2005, 05:28

About the SIMDI workshop i Gothenburg.

Unfortunately we didn't see this discussion util today, sorry about that, and would just like to make some comments.
We have been told by the organizers of this workshop that they have been in contact with Henry Weller. The fee of 5000 sek does NOT go to Niklas W and I who are presenting, and who just want to show the CFD industry and others some of the powers of OpenFOAM. We are NOT getting paid for this. Frankly I don't think any of the non-commercial attendees are paying anything for the workshop.

And yes, Alberto is absolutely right, we only have time to scratch on the surface of these magnificant libraries and "show beautiful coloured contour plots. ". Plots that show, however, that OpenFOAM is handling complex physics and is accurate, robust and efficient, through a wealth of published results. Likely nothing that is new to this community, but all too important.

Furthermore, the SIMDI adverticement on CFD-online and CFD-Review about the two of us beeing "expert FOAM developers" was written by the organizers without our knowledge.

Best Regards

Eric and Niklas

June 29, 2005, 13:21	Dear all, I read on CFD-onlin	#1
panara Senior Member Daniele Panara Join Date: Mar 2009 Posts: 101 Rep Power: 17	Dear all, I read on CFD-online about the SIMDI OpenFoam Workshop, can somebody give more details about it? Why it is not advertised on the OpenFoam web pages? More documentation will be released during the workshop? Thanks in advance for any extra information, regards, Daniele

June 29, 2005, 13:28	We have not included anything	#2
henry Senior Member Join Date: Mar 2009 Posts: 854 Rep Power: 22	We have not included anything on the OpenFOAM or OpenCFD web-sites about this workshop because we have not been told anything about it, not even that it is happening.

June 29, 2005, 14:33	Dr Jasak's message has been re	#3
OpenFOAM discussion board administrator Guest Posts: n/a	Dr Jasak's message has been removed for legal reasons.

June 29, 2005, 18:36	I think you can obtain the sam	#4
alberto Senior Member Alberto Passalacqua Join Date: Mar 2009 Location: Ames, Iowa, United States Posts: 1,912 Rep Power: 36	I think you can obtain the same information by reading the user guide and doing the tutorials. It's a 4 hours workshop (definetly too expensive: 500 SEK are about 530 euros): they just don't have the time to teach you something about FOAM programming. Probably they just will show the structure of equation implementation, comment an existing solver and show beautiful coloured contour plots. ;-) Just my opinion, however. Alberto __________________ Alberto Passalacqua GeekoCFD - A free distribution based on openSUSE 64 bit with CFD tools, including OpenFOAM. Available as in both physical and virtual formats (current status: http://albertopassalacqua.com/?p=1541) OpenQBMM - An open-source implementation of quadrature-based moment methods. To obtain more accurate answers, please specify the version of OpenFOAM you are using.

June 29, 2005, 18:42	Sorry...it was 5000 SEK http:/	#5
alberto Senior Member Alberto Passalacqua Join Date: Mar 2009 Location: Ames, Iowa, United States Posts: 1,912 Rep Power: 36	Sorry...it was 5000 SEK __________________ Alberto Passalacqua GeekoCFD - A free distribution based on openSUSE 64 bit with CFD tools, including OpenFOAM. Available as in both physical and virtual formats (current status: http://albertopassalacqua.com/?p=1541) OpenQBMM - An open-source implementation of quadrature-based moment methods. To obtain more accurate answers, please specify the version of OpenFOAM you are using.

September 8, 2005, 05:28	About the SIMDI workshop i Got	#6
lillberg Member Eric Lillberg Join Date: Mar 2009 Location: Stockholm Posts: 80 Rep Power: 17	About the SIMDI workshop i Gothenburg. Unfortunately we didn't see this discussion util today, sorry about that, and would just like to make some comments. We have been told by the organizers of this workshop that they have been in contact with Henry Weller. The fee of 5000 sek does NOT go to Niklas W and I who are presenting, and who just want to show the CFD industry and others some of the powers of OpenFOAM. We are NOT getting paid for this. Frankly I don't think any of the non-commercial attendees are paying anything for the workshop. And yes, Alberto is absolutely right, we only have time to scratch on the surface of these magnificant libraries and "show beautiful coloured contour plots. ". Plots that show, however, that OpenFOAM is handling complex physics and is accurate, robust and efficient, through a wealth of published results. Likely nothing that is new to this community, but all too important. Furthermore, the SIMDI adverticement on CFD-online and CFD-Review about the two of us beeing "expert FOAM developers" was written by the organizers without our knowledge. Best Regards Eric and Niklas

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
An Open Source mesh generator for Open Foam	Ahmed	Main CFD Forum	15	September 23, 2010 18:39
[OpenFOAM] Problems using paraview 244 under open FOAM 141 or 13	sergio	ParaView	0	March 13, 2008 13:52
Structure Analyis Open Foam	dontknow	Main CFD Forum	1	August 31, 2007 06:05
Installation of Open foam 12	ds2taieb	OpenFOAM Installation	1	January 15, 2006 23:46
Some questions about Open Foam	cicciopasticcio	OpenFOAM Running, Solving & CFD	0	December 17, 2005 08:41