icoFsiFoam case needed

vivekcfd · May 1, 2009, 03:51

Hi

I am running a case of flexible pipe with icoFsiFoam. However, iterations are diverging after certain time-steps. IT seems something is not right in the choice of boundary conditions in OF esp on the solid side. I have already tested the case in ANSYS-CFX and I have no problem running it there. I wanted to compare OF results with the results of CFX (peroformance as well). Therefore, I am looking for a standard FSI test case for internal flows (I mean in the form of OF case files not papers or slides).

I have seen a few cases of FSI for flexible pipes/rubes by Openfoam on the net. For instance: "Fluid-Structure Interaction Approach in Hemodynamic Wall Shear Stress Analysis" by V. Kanyanta, A. Ivankovic, and A. Karac.

Can someone share such a test case (may not be exactly from the publication) so that it can become a standard test case for icoFsiFoam? That would be great.

thanks a lot.

Vivek

ulli · May 6, 2009, 14:41

I didn't run FSI-cases with OpenFOAM yet but I think
the example:

icoStructFoam, a Fluid-Structure Interaction Solver
at
http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2007/

is rather close to your case.

If you are interested I can sent you a paper where I used ADINA for the transient blood flow cases (pulse wave velocity).

Ulli

May 1, 2009, 03:51	icoFsiFoam case needed	#1
vivekcfd Member Vivek Kumar Join Date: Mar 2009 Location: Switzerland Posts: 35 Blog Entries: 1 Rep Power: 18	Hi I am running a case of flexible pipe with icoFsiFoam. However, iterations are diverging after certain time-steps. IT seems something is not right in the choice of boundary conditions in OF esp on the solid side. I have already tested the case in ANSYS-CFX and I have no problem running it there. I wanted to compare OF results with the results of CFX (peroformance as well). Therefore, I am looking for a standard FSI test case for internal flows (I mean in the form of OF case files not papers or slides). I have seen a few cases of FSI for flexible pipes/rubes by Openfoam on the net. For instance: "Fluid-Structure Interaction Approach in Hemodynamic Wall Shear Stress Analysis" by V. Kanyanta, A. Ivankovic, and A. Karac. Can someone share such a test case (may not be exactly from the publication) so that it can become a standard test case for icoFsiFoam? That would be great. thanks a lot. Vivek

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Errors in running a icoFsiFoam case	jin_xu	OpenFOAM Pre-Processing	0	June 9, 2008 07:48
Extra information needed.	Kapil S	Main CFD Forum	0	March 29, 2006 12:00
New case	Constantinos Zervides (Zervides)	OpenFOAM Pre-Processing	5	October 24, 2005 04:34
How to save a case running in background	us	FLUENT	0	July 6, 2005 11:43
Whatbs best way to create new case	jvn	OpenFOAM Pre-Processing	2	June 20, 2005 22:19

May 6, 2009, 14:41		#2
ulli Member Ulrich Heck Join Date: Mar 2009 Location: Krefeld, Germany Posts: 42 Rep Power: 18	I didn't run FSI-cases with OpenFOAM yet but I think the example: icoStructFoam, a Fluid-Structure Interaction Solver at http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2007/ is rather close to your case. If you are interested I can sent you a paper where I used ADINA for the transient blood flow cases (pulse wave velocity). Ulli