|
[Sponsors] |
June 15, 2009, 22:45 |
Foam fatal error
|
#1 |
New Member
Brian
Join Date: Jun 2009
Posts: 1
Rep Power: 0 |
Hello,
I am having issues with mesh conversions. I am running openfoam-1.4 which came with caelinux-1.4.1. Currently, I am using Salome 3.2.9 to mesh/define boundarys. I use the NETGEn 1D-2D-3D algorith when meshing. Then I create groups for walls, inlets, outlets,.... Finally I use the "Export to UNV file" option to create a mesh file Openfoam will accept. I run the cae console and type "ideasUnvToFoam $FOAM_RUN FUMEHOOD fumehood.unv" Where FUMEHOOD is the case and fumehood.unv is the mesh exported from SALOME. I get the following fatal error: "FOAM FATAL ERROR : Trying to specify a boundary face 3(42 35 7529) on the face on cell 5139 which is either an internal face or already belongs to some other patch. This is face 39704 of patch 2 named WALL.#0..............." I have meshed many different models and some work, but most do not. Is my problem generating the groups? or is it an openfoam problem? I have looked online for and found some discussion, but i was not able to find an obvious solution. Please, any help would be great. I been working quite a few weekds on this. Thank you, Brian |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Compile problem | ivanyao | OpenFOAM Running, Solving & CFD | 1 | October 12, 2012 09:31 |
Problem with compile the setParabolicInlet | ivanyao | OpenFOAM Running, Solving & CFD | 6 | September 5, 2008 20:50 |
Compiling problems with hello worldC | fw407 | OpenFOAM Installation | 21 | January 6, 2008 17:38 |
DecomposePar links against liblamso0 with OpenMPI | jens_klostermann | OpenFOAM Bugs | 11 | June 28, 2007 17:51 |
user subroutine error | CFDUSER | CFX | 2 | December 9, 2006 06:31 |