CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > OpenFOAM

face and cell centered values

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 17, 2009, 11:01
Default face and cell centered values
New Member
Join Date: Jul 2009
Posts: 3
Rep Power: 10
danihuso is on a distinguished road
Hi OpenFOAM community

I did a simple case for a cuette flow, with a fixed plate at the bottom and a 1m/s moving plate at the top. When I see the vector field the values don't go from 0 to 1 but form .82 to .96 . At the beginning I though it was a problem with the converter foamToFieldview9 but when I checked in paraview it has the same problew. Does anyboy know how to include the cell face values from the boundaries to the flow field center values? is it possible?
danihuso is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Internal walls of zero thickness anger OpenFOAM Native Meshers: blockMesh 22 December 15, 2015 03:06
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
BlockMeshmergePatchPairs hjasak OpenFOAM Native Meshers: blockMesh 11 August 15, 2008 07:36
Cell face values computation un unstructured grids Sergio Rossi Main CFD Forum 2 May 28, 2006 10:04
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15

All times are GMT -4. The time now is 12:38.