CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM

Error with steady run of rasCavitatingFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 17, 2009, 10:44
Angry Error with steady run of rasCavitatingFoam
  #1
New Member
 
varun
Join Date: Jul 2009
Location: Braunschweig, Germany
Posts: 28
Rep Power: 16
vw.cfd is on a distinguished road
Hi,

I have simulated a two phase mixture in rasCavitatingFoam with K-Omega SST model for a transient run succesfully. Now, i wish to perform the same simulation as a steady state case. But, when i make the neccessary changes in the fvSchemes dictionary and run the case, i get the following error message:

[0] [1] #0 #0 Foam::error:PrintStack(Foam::Ostream&)Foam::error: PrintStack(Foam::Ostream&) in in "/appl/openfoam/1.5/OpenFOAM-1.5/li b/linux64GccDPOpt/libOpenFOAM.so"
[0] #1 Foam::sigFpe::sigFpeHandler(int)"/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
[1] #1 Foam::sigFpe::sigFpeHandler(int) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
[0] #2 in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
[1] #2 __restore_rt__restore_rt in "/lib64/tls/libc.so.6"
[0] #3 FoamDILUPreconditioner::calcReciprocalD(Foam::Fiel d<double>&, Foam::lduMatrix const&) in "/lib64/tls/libc.so.6"
[1] #3 FoamDILUPreconditioner::calcReciprocalD(Foam::Fiel d<double>&, Foam::lduMatrix const&) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64 GccDPOpt/libOpenFOAM.so"
[0] #4 FoamDILUPreconditionerDILUPreconditioner(Foam::ldu Matrix::solver const&, Foam::Istream&) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/li nux64GccDPOpt/libOpenFOAM.so"
[0] #5 Foam::lduMatrix:Preconditioner::addasymMatrixConst ructorToTable<FoamDILUPreconditioner>::New(Foam::l duMatrix::solver const&, Foam::I stream&) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
[0] #6 Foam::lduMatrix:Preconditioner::New(Foam::lduMatri x::solver const&, Foam::Istream&) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64Gcc DPOpt/libOpenFOAM.so"
[1] #4 FoamDILUPreconditionerDILUPreconditioner(Foam::ldu Matrix::solver const&, Foam::Istream&) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/li nux64GccDPOpt/libOpenFOAM.so"
[0] #7 Foam::PBiCG::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux 64GccDPOpt/libOpenFOAM.so"
[1] #5 Foam::lduMatrix:reconditioner::addasymMatrixCons tructorToTable<Foam:ILUPreconditioner>::New(Foam ::lduMatrix::solver const&, Foam::I stream&) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
[0] #8 Foam::fvMatrix<double>::solve(Foam::Istream&) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so"
[1] #6 Foam::lduMatrix:reconditioner::New(Foam::lduMatr ix::solver const&, Foam::Istream&) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64Gcc DPOpt/libOpenFOAM.so"
[1] #7 Foam::PBiCG::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux 64GccDPOpt/libOpenFOAM.so"
[1] #8 Foam::fvMatrix<double>::solve(Foam::Istream&) in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libfiniteVolume.so"
[0] #9 in "/appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libfiniteVolume.so"
[1] #9 main in "/appl/openfoam/1.5/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/rasCavitatingFoam"
[0] #10 __libc_start_main in "/lib64/tls/libc.so.6"
[0] #11 main in Foam::regIOobject::readIfModified()"/appl/openfoam/1.5/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/rasCavitatingFoam"
[1] #10 __libc_start_main in "/lib64/tls/libc.so.6"
[1] #11 in "/appl/openfoam/1.5/OpenFOAM-1.5/applications/bin/linux64GccDPOpt/rasCavitatingFoam"
[pbplnx11:07198] *** Process received signal ***
[pbplnx11:07198] Signal: Floating point exception (8)
[pbplnx11:07198] Signal code: (-6)
[pbplnx11:07198] Failing at address: 0xb1cb00001c1e
[pbplnx11:07198] [ 0] /lib64/tls/libc.so.6 [0x3fd2c2e300]
[pbplnx11:07198] [ 1] /lib64/tls/libc.so.6(gsignal+0x3d) [0x3fd2c2e26d]
[pbplnx11:07198] [ 2] /lib64/tls/libc.so.6 [0x3fd2c2e300]
[pbplnx11:07198] [ 3] /appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so(_ZN4Foam18DILUPreconditioner15calcR eciprocalDERNS_5Fie ldIdEERKNS_9lduMatrixE+0x93) [0x2a96c67b13]
[pbplnx11:07198] [ 4] /appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so(_ZN4Foam18DILUPreconditionerC1ERKNS _9lduMatrix6solverE RNS_7IstreamE+0x57) [0x2a96c67db7]
[pbplnx11:07198] [ 5] /appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so(_ZN4Foam9lduMatrix14preconditioner3 1addasymMatrixConst ructorToTableINS_18DILUPreconditionerEE3NewERKNS0_ 6solverERNS_7IstreamE+0x3c) [0x2a96c6823c]
[pbplnx11:07198] [ 6] /appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so(_ZN4Foam9lduMatrix14preconditioner3 NewERKNS0_6solverER NS_7IstreamE+0x273) [0x2a96c57233]
[pbplnx11:07198] [ 7] /appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libOpenFOAM.so(_ZNK4Foam5PBiCG5solveERNS_5FieldIdE ERKS2_h+0xa96) [0x2 a96c5c136]
[pbplnx11:07198] [ 8] /appl/openfoam/1.5/OpenFOAM-1.5/lib/linux64GccDPOpt/libfiniteVolume.so(_ZN4Foam8fvMatrixIdE5solveERNS_ 7IstreamE+0x167) [0 x2a96084257]
[pbplnx11:07198] [ 9] rasCavitatingFoam [0x41d88b]
[pbplnx11:07198] [10] /lib64/tls/libc.so.6(__libc_start_main+0xdb) [0x3fd2c1c40b]
[pbplnx11:07198] [11] rasCavitatingFoam(_ZN4Foam11regIOobject14readIfMod ifiedEv+0x1a9) [0x41aa09]
[pbplnx11:07198] *** End of error message ***
mpirun noticed that job rank 0 with PID 7198 on node pbplnx11 exited on signal 8 (Floating point exception).


Am i forgetting to change some parameters??
Please help!!

ThnX!!!

P.S: I am using the same mesh and the initial conditions.
Attached Files
File Type: txt errlog_steady.txt (4.9 KB, 3 views)
vw.cfd is offline   Reply With Quote

Reply

Tags
multiphase, rascavitatingfoam, steady state

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
Steady State 2 phase problem fivos FLUENT 0 April 27, 2009 17:34
How to run InterFoam in steay state waynezw0618 OpenFOAM Running, Solving & CFD 0 November 10, 2008 08:08
transient problem run in steady state luigi FLUENT 4 March 13, 2008 07:54
Do we need to run the steady condition first? kk FLUENT 2 February 1, 2007 15:02


All times are GMT -4. The time now is 09:40.