gmsh to openfoam

sarajags_89 · October 8, 2009, 04:45

hi .. I have a mesh created using gmsh and i am unable to convert into open foam.I followed the instruction in
http://openfoamwiki.net/index.php/Contrib_gmshFoam
The following procedure, the gmshFoam and Gmsh packages are assumed to be downloaded into:

The gmshFoam package: $WM_PROJECT_USER_DIR/applications/utilities ("I had created this directory manually, it was not there")
The Gmsh source package: $WM_PROJECT_INST_DIR/$WM_ARCH

Build the libraries and standalone utilities (YYYYMMDD denotes the release date of the gmshFoam package).$ cd $WM_PROJECT_USER_DIR/applications/utilities
$ tar -zxf gmshFoam-YYYYMMDD.tar.gz
$ ln -s gmshFoam-YYYYMMDD gmshFoam <<--- Necessary for gmshFoam to be recognized by FoamX
$ cd gmshFoam
$ ./Allwmake

I am getting an error when I execute ./Allwmake. suggestions plss!

bmandt · October 8, 2009, 05:15

Hi all,

I have the same problem:

polyMeshConversion/polyMeshConversion.C:231: error: ‘allFaces’ was not declared in this scope
polyMeshConversion/polyMeshConversion.C:264: error: ‘allPoints’ was not declared in this scope
make: *** [Make/linuxGccDPOpt/polyMeshConversion.o] Fehler 1

The other theads on this forum regarding this problem do not help solving it.

I hope, someone can explain the hint for dummies.

Thank you very much for your kind help.

benjamin

October 8, 2009, 04:45	gmsh to openfoam	#1
sarajags_89 Member sarangarajan Join Date: Sep 2009 Posts: 31 Rep Power: 16	hi .. I have a mesh created using gmsh and i am unable to convert into open foam.I followed the instruction in http://openfoamwiki.net/index.php/Contrib_gmshFoam The following procedure, the gmshFoam and Gmsh packages are assumed to be downloaded into: The gmshFoam package: $WM_PROJECT_USER_DIR/applications/utilities ("I had created this directory manually, it was not there") The Gmsh source package: $WM_PROJECT_INST_DIR/$WM_ARCH Build the libraries and standalone utilities (YYYYMMDD denotes the release date of the gmshFoam package).$ cd $WM_PROJECT_USER_DIR/applications/utilities $ tar -zxf gmshFoam-YYYYMMDD.tar.gz $ ln -s gmshFoam-YYYYMMDD gmshFoam <<--- Necessary for gmshFoam to be recognized by FoamX $ cd gmshFoam $ ./Allwmake I am getting an error when I execute ./Allwmake. suggestions plss!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAD -> gMsh -> enGrid -> OpenFOAM Problem	AlGates	OpenFOAM	7	August 6, 2010 12:46
From gmsh to OpenFOAM	samiam1000	OpenFOAM	6	October 9, 2009 05:58
Modified OpenFOAM Forum Structure and New Mailing-List	pete	Site News & Announcements	0	June 29, 2009 05:56
[Gmsh] GMSH and OpenFOAM	derath	OpenFOAM Meshing & Mesh Conversion	44	September 4, 2008 05:09
[Gmsh] ANSYS GMSH OpenFOAM	gtg627e	OpenFOAM Meshing & Mesh Conversion	3	December 21, 2007 03:41

October 8, 2009, 05:15		#2
bmandt New Member Benjamin Mandt Join Date: Sep 2009 Location: Germany Posts: 8 Rep Power: 16	Hi all, I have the same problem: polyMeshConversion/polyMeshConversion.C:231: error: ‘allFaces’ was not declared in this scope polyMeshConversion/polyMeshConversion.C:264: error: ‘allPoints’ was not declared in this scope make: *** [Make/linuxGccDPOpt/polyMeshConversion.o] Fehler 1 The other theads on this forum regarding this problem do not help solving it. I hope, someone can explain the hint for dummies. Thank you very much for your kind help. benjamin